--- title: "Billable Weight-Based Rate Entries" slug: "billable-weight-based-rate-entries" tags: ["Rate Entry", "Admin", "Expanded Content"] updated: 2025-10-10T20:47:11Z published: 2025-11-05T15:37:03Z canonical: "documents.revenova.com/billable-weight-based-rate-entries" --- > ## Documentation Index > Fetch the complete documentation index at: https://documents.revenova.com/llms.txt > Use this file to discover all available pages before exploring further. # Billable Weight-Based Rate Entries When the **Rate Method** in a Rate Entry is *Per Pound (Billable)* or *Per Kilogram (Billable),* the **DIM Factor** and **Volume Units** become available and are required. ![""](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Rate Entry Billable Fields(1).png) ## DIM Weight The **DIM Factor** field is used to calculate the (Dimensional) **DIM Weight**. The **DIM Weight** field in Customer and Carrier Quotes is the amount of space that Line Items occupy compared to their weight. The TMS calculates the DIM Weight by multiplying the **Total Volume** of the Load by the DIM Factor. $DIM\:Weight = {Total\:Volume}*{DIM\:Factor}$ > [!WARNING] > **Calculation Note**: The **DIM Factor** should be set as a decimal value, not a whole number. For example, if the **DIM Factor** is 139, then the value in the Rate Entry should be set as 0.007194. ## Volume All Line Items with a **Volume** value in the Load are added together to get the **Total Volume** of the Load. > [!NOTE] > **Note**: The Line Item and Load **Volume** fields must be populated when the volume is required for quoting. The Line Item dimensions (**Length**/**Width**/**Height**) and (Handling Unit) **HU Count** fields are used to calculate the **Volume** for the Line Item. $Volume = {Length*Width*Height*HU\:Count}$ The **Volume Units** should be set to the cubic units (*Cubic Inches*, *Cubic Centimeters*, *Cubic Feet*, *Cubic Meters*) of the **Dimension Units** (*in*, *cm*, *ft*, *m*). ![""](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Billable Weight-Based Rate Entry Line Item Volume.png) If the **Volume** is known in gallons or liters, enter the **Volume** and appropriate **Volume Units** (*Gallons* or *Liters*) for the Line Item. ### Auto-Calculate Area and Volume When the **Auto-Calculate Area and Volume** field in a Line Item record is *checked*, the TMS automatically calculates the volume with the **HU Count** field and dimensions. If this field is not *checked*, the TMS doesn’t calculate the **Volume** for the Line Item or add it to the **Total Volume** of the Load. The TMS converts the **Dimension Units** measurements to feet before auto-calculating the **Volume** of the Line Item. For example, if the Length, Width, and Height of 5 pallets are all 36 **inches** (36×36×36), the TMS converts it to **feet** (3×3×3) and then multiplies it by the **HU Count**. The volume would be calculated as (3×3×3×5) = 135 **cubic feet**. The **Auto-Calculate Area and Volume** field will auto-calculate the **Volume Units** in *Cubic Feet*. ![""](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Auto-Calculate Area and Volume field.png) > [!NOTE] > Line Item Field Sets > > To auto-calculate the area and volume of Line Items **during** Load creation instead of **after** creation, add the **Auto-Calculate Area and Volume** field to the appropriate Line Item field set: > > - For the [Line Item Detail](/v1/docs/line-item-detail) LWC part of the Load Configuration, add the field to the [Line Item TMS1](/v1/docs/field-set-summary#line-item) field set. > - For the [Quote Wizard](/v1/docs/quote-wizard-setup#load-entry-page) LWC in the Customer Portal, add the field to the [Line Item TMS6](/v1/docs/field-set-summary#line-item) field set. ## Billable Weight (Cube vs. Actual) The **DIM Weight** and the **Billable Weight** are on the Customer Quote and Carrier Quote records and are populated by Billable Weight-Based Rate Entries. These fields use the same **Weight Units** as the Load. ![""](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Customer Quote DIM Weight and Billable Weight Fields(1).png) The **Billable Weight** is the greater value of either the **DIM Weight** or **Total Weight** on the Load. For example, if the DIM Weight is 80 and the Total Weight is 120, the Billable Weight is set to 120. ## Deficit Rating When a Rate Entry that uses the *Per Pounds (Billable)* or *Per Kilograms (Billable)* **Rate Method** and has the **Enable Deficit Rating** box *checked*, the **Billable Weight** is used to calculate the deficit rate instead of the **Total Weight** of the Load. If a deficit rating is applicable, the **Billable Weight** is rated at the **next** weight tier and is indicated by the note for the charge on the quote, using the following format: “Load weight was {**Billable Weight** of the quote} but rated at {minimum weight of tier used in the Rate Entry}” ![""](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Billable Weight-Based Rate Entry Deficit Rate.png) > [!WARNING] > **Rerate/Refresh Note**: To add the red ‘Rerate’ or ‘Refresh’ pill in the Customer or Carrier Quote LWC when the **Total Volume** or **Total Weight** changes—and thus may affect a change for the Billable Weight—add the **Total Volume** and **Total Weight** fields in the [Load TMS11](/v1/docs/field-set-summary#load) field set. This pill will help indicate if a Customer or Carrier Quote with a deficit rate for the **Billable Weight** needs to be updated. > > See the [Rerate/Rebill](/v1/docs/reraterebill) article for more setup information. ### Deficit Rate Example If the **Total Weight** of the Load is 530 lbs and the **Total Volume** is 99 Cubic Feet, and the **DIM Factor** in the Rate Entry is 0.1, the **DIM Weight** is calculated to be 990.00 lbs $(99/0.1)$. Since the DIM Weight is greater than the Total Weight, the **Billable Weight** is 990.00 lbs (equal to the DIM Weight). The deficit rating applies to the **Billable Weight** when it would charge the customer or carrier **less** to rate it at the **next** weight tier. This is calculated by multiplying the weight by the rate set in the [Rate Entry Axis Calculation](/v1/docs/rate-entry-detail#calculation-axis-setup). $(Rate * Weight)$ The following image illustrates the weight tiers for a Billable Weight-Based Rate Entry with the deficit rating feature enabled. ![""](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Billable Weight-Based Rate Entry Deficit Rate Weight Axis(1).png) Suppose the **Billable Weight** is rated as USD 0.2126 per pound at 990 lbs. This would have the freight charge set as **USD 210.47** $(0.2126 * 990)$. Suppose the next weight tier is rated as USD 0.2070 per pound, but must be at least 1,000 lbs. This would have the freight charge set as **USD 207.00** $(0.2070 * 1000)$. To charge the customer or carrier **less**, the deficit rate is applied by rating the weight at 1,000 lbs instead of the actual 990 lbs.