--- title: "Winter '26 EDI 204/404: Load Tenders" slug: "winter-26-load-tenders" tags: ["EDI", "Load Tendering", "Winter '26"] updated: 2026-06-02T15:32:53Z published: 2026-06-02T15:32:53Z canonical: "documents.revenova.com/winter-26-load-tenders" --- > ## Documentation Index > Fetch the complete documentation index at: https://documents.revenova.com/llms.txt > Use this file to discover all available pages before exploring further. # Winter '26 EDI 204/404: Load Tenders **For EDI REST**: See additional documentation for payload examples and other endpoint information. **For EDI SOAP** (deprecated): See the [EDI Specification Guide](/previous-releases/docs/winter-26-revenova-tms-edi-specifications) for examples of EDI 204/404 transaction payloads. EDI 204 and EDI 404 are the initial Load Tender transactions: 204 for freight and 404 for rail. Outbound 204 Load Tender transactions are sent to Carriers from the TMS in the Carrier Flow process. EDI Load Tender transactions are populated with **EDI Response Deadline** date/time field values 2 hours after the Tender is sent. 990 Tender Responses received after the EDI Response Deadline are processed by the TMS. A **Quote/Contract Id** is typically required for carrier quotes tendered via EDI. For Carriers that receive EDI 204 tenders and send EDI 990 Accepts/Declines, make sure the Carrier Service **Tender Method** field is set to **EDI** and that the **EDI Provider** field is also set. ## EDI 204 Inbound Inbound Load Tenders create new Load records with an **EDIStatus** field value of *Pending.* The Load **EDI Provider** field value contains the EDI Provider sending sent the inbound 204 EDI Transaction. Line Item information is not required in the EDI 204 transaction. Manage inbound EDI 204 update transactions on the [EDI Order Update Console](/previous-releases/docs/winter-26-edi-order-update-console) Lightning Web Component (LWC). The TMS supports EDI 204 transactions for a single Load that contains multiple Stops for the same location. > [!NOTE] > **Note**: EDI 204/404 transactions support the following date formats: > > - YYYY-MM-DD > - MM/DD/YYYY > - MMDDYYYY > - YYYYMMDD > > If a date does not following one of the following formats an error email is generated and sent with the payload for troubleshooting. ### **Load References** Load Reference records store Load and Stop EDI reference numbers received in EDI 204 transactions. The information that populates in Load Reference records is passed back to the EDI VAN in outbound transactions from the TMS. Load References are populated from inbound transactions and are accessible (read-only) via a related list on the Load Detail page. Load Reference records are always included on outbound EDI transactions. ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/image-1696955346660.png?sv=2026-02-06&spr=https&st=2026-06-02T15%3A03%3A50Z&se=2026-06-02T15%3A18%3A50Z&sr=c&sp=r&sig=K4m051Pj7LNBK9h5%2BaPvx%2BRJSWow1tWIIpK2dbb2L%2Bo%3D) #### **EDI Load References** Reference fields from inbound EDI transactions may be set for certain Load, Stop, or Line Item fields for each EDI Location. See the [EDI Locations](/previous-releases/docs/winter-26-edi-locations#create-edi-load-reference-records) documentation for creating these field mapping rules. EDI Load Reference records may update TMS fields and/or be included on outbound EDI transactions. #### **Multiple PO Numbers** The TMS supports multiple PO Numbers for inbound EDI 204 transactions. PO Numbers are combined from the Load References field and populate the Load **PO Number** field. This field is limited to 100 characters and stops adding values once the limit is reached. Select *Outbound* or *Both* for the EDI Load Reference **Direction** field. The Load Reference populates and contains the PO Number values. This allows all PO Numbers received in the 204 transaction to be used, even when more than 100 characters are received. The same reference type is sent in a single outbound EDI 204 transaction. Multiple combined PO Number references are sent. EDI Load Reference values are combined with any existing Load, Line Item, or Stop field value. The formatting places EDI Load References first, followed by the named field. Fields may be updated automatically based on any EDI Update Setting records. Duplicates are removed before inserting into the field. If Load Reference data is mapped on the EDI Location record, the Load Reference is sent without checking for any duplicate information. #### **HazMat Contact** A Hazmat Contact must have a **Name** and a **Phone** or **Email**. When Hazmat contacts are received in an inbound EDI 204 transaction, the TMS searches for the Contact based on the following criteria: 1. The Stop Pickup and Delivery Account locations for the Hazmat Line Item are checked to see if the Contact exists: 1. The **Phone Number** and **Email** are compared. If a Contact is matched but the **Name** or **Email** does not match the inbound 204 Contact, the location Contact is updated. This matched Contact record is the Hazmat Contact. 2. When the Contact on either Stop Account exists but does not have the *Hazmat* **Transportation Role**, the Hazmat value is added to the Contact. The Contact is added for the Line Item with the updated **Transportation Role**. 2. When no Contact match exists on either Stop Account, a new Contact is created with the *Hazmat* **Transportation Role**. 1. The new Contact is added to the Pickup Stop for the Line Item. If an updated EDI 204 transaction is received with a new Hazmat contact, the Hazmat Contact is changed to the new value. #### **Equipment Type** The TMS receives the [Equipment Type](/previous-releases/docs/winter-26-equipment-type-setup) in the 204 transaction and attempts to match it to an existing value in the TMS. The following rules define how the TMS attempts to match the Equipment Type: - Special characters are removed - Order of words (order is ignored) - Capitalization is matched > [!NOTE] > **Note**: Matches only occur on **all** words. Example: The Equipment Type is “Dry Van 53’.” The equipment type matches on the following: > > - Van Dry 53’ > - 53’ Dry Van > - Dry 53’ Van > > Does NOT match: > > - 53’ Van The **Equipment Type** of the Load is updated when an updated **Equipment Type** is received in an EDI 204 transaction. If no Equipment Type match is found, the Equipment Type from the EDI Transaction populates in the Load **Other Instructions** field. #### **Auto-Accept EDI 204** Automatically send 990 Load Tender Accept transactions for both original EDI 204 and Update 204 transactions for each trading partner. ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/EDI Update Setting - 3.jpg?sv=2026-02-06&spr=https&st=2026-06-02T15%3A03%3A50Z&se=2026-06-02T15%3A18%3A50Z&sr=c&sp=r&sig=K4m051Pj7LNBK9h5%2BaPvx%2BRJSWow1tWIIpK2dbb2L%2Bo%3D) > [!NOTE] > Both **Auto-Accept Update** 204 and **Use EDI Order Update Console** cannot be checked. Select one or the other. Manually process inbound EDI 204 Update transactions from the EDI Order Update Console. The Console may be enabled for each trading partner. See the [EDI Order Update Console LWC](/previous-releases/docs/winter-26-edi-order-update-console) documentation for instructions on using the console. ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/image-1696942786081.png?sv=2026-02-06&spr=https&st=2026-06-02T15%3A03%3A50Z&se=2026-06-02T15%3A18%3A50Z&sr=c&sp=r&sig=K4m051Pj7LNBK9h5%2BaPvx%2BRJSWow1tWIIpK2dbb2L%2Bo%3D) ## EDI 404 ### Inbound Transactions The following field values may be updated from inbound EDI 404 transactions. - When a Seal Number is included in the 404, that field is saved to the Load **Seal Number** field. - Adding a Load with a **Seal Number** to a Trip Plan Segment populates the **Seal Number** on the Trip Plan Leg Asset. The Load **Seal Number** does not overwrite an existing Trip Plan Leg Asset **Seal Number**. ### Outbound Transactions Additional fields support outbound 404 transactions. | TMS Value | TMS Web Service Element | TMS Field Mapping (Object → Fields) | | --- | --- | --- | | - Carrier Loads in a Freight Plan refer to the Freight Plan Carrier Load to send the Bill To. - Carrier Bill To is charged for moving the Load. | billTo | Load → Carrier Bill To | | - The Carrier Quote Quote/Contract ID field is sent in the EDI 404 transaction. - This field contains the Price Authority Identification required to tender to the Rail. - Example: PI*CT*10000***CSXT*AGRT | carrierQuoteId | Carrier Quote → Quote/Contract ID | | - Carrier Loads in a Freight Plan refer to the Freight Plan Customer Load. - Customer Account billed for the Load. - Customer Account billed for moving the Load (from Customer Load in a Freight Plan). - Billing Contact is associated with the Account populated in the Customer Bill To. | customerBillTo | Load → Customer Bill To | | - The Load Customs Broker field Account is included in the EDI transaction based on the Contact **Transportation Role** field. - The ACE Contact is sent when the last Stop location of the Carrier Load is in the US. - The ACI Contact is sent when the last Stop location of the Carrier Load is in Canada. | customsBroker | Load → Customs Broker (Account → Name, Shipping Street, Shipping City, Shipping State Code, Shipping Postal Code, Shipping Country Code) | | - The destination route information for the Rail move. - This field is not automatically populated on the Carrier Quote. Manually enter this value, populate with a flow, or a custom integration. - Example 404: R2*CSXT*S*CHGO**25*X R2*UP*1***25*X (interchange route information) - Revenova example: CSXT S CHGO 25 X | destinationTerminalLocation | | | - The level of transportation service requested Rail in the Tender. - See the table of [Movement Type Codes](/previous-releases/docs/winter-26-load-tenders#movement-type-codes) below for picklist values. | movementType | Carrier Quote → Movement Type | | - The Accepted Carrier Account on the next leg of the Freight Plan. - The Contact sent is the Tender Contact on the Carrier Service. - The Account associated with the Contact in the Load **Notify Party** field (Load not part of a Freight Plan) - *If no Account is populated, no values are sent in the EDI transaction.* | notifyParty | Account → Name, Shipping Street, Shipping City, Shipping State Code, Shipping Postal Code, Shipping Country Code | | - The origin route information for the Rail move. - This field is not automatically populated on the Carrier Quote. Manually enter this value, populate with a flow, or a custom integration. - Example 404: R2*CSXT*S*CHGO**25*X R2*UP*1***25*X (interchange route information) - Revenova example: CSXT S CHGO 25 X | originTerminalLocation | | | - The last Stop Account from the Customer Load in the Freight Plan (for Freight Plan Loads). - For non-Freight Plan Loads, the Account populated in the Load **Ultimate Consignee** field. - *If no Account is populated, no values are sent in the EDI transaction.* - The Contact is the Shipping/Receiving Contact for the last Stop of the Customer Load in the Freight Plan. - The Carrier Quote **Tender Sent Date** field is set when the sendLoadTender operation completes. | ultimateConsignee | Stop → Appointment Required, Appointment Time, Expected Date, Shipping/Receiving Hours, Time Zone (LT) | | - The first Stop Account from the Customer Load in the Freight Plan. - The Contact is the Shipping/Receiving Contact for the first Stop of the Customer Load in the Freight Plan. - The **Ultimate Shipper** does not require an Appointment Time to successfully send. | ultimateShipper | Stop → Appointment Required, Appointment Time, Expected Date, Shipping/Receiving Hours, Time Zone (LT) | #### **Movement Type Codes** | Code | Movement Type | | --- | --- | | 15 | Moto/Rail - Ramp to Ramp | | 20 | Rail - Door to Door | | 22 | Rail - Door to Destination Ramp | | 25 | Rail - Ramp to Ramp | | 27 | Rail - Origin Ramp to Door | | 40 | Steamship/Stack Operator - Door to Door | | 42 | Steamship/Stack Operator - Door to Destination Ramp | | 45 | Steamship/Stack Operator - Ramp to Ramp | | 47 | Steamship/Stack Operator - Origin Ramp to Door | | 60 | Patron/Customer - Door to Door | | 62 | Patron/Customer - Door to Destination Ramp | | 65 | Patron/Customer - Ramp to Ramp | | 67 | Patron/Customer - Origin Ramp to Door | | 80 | Steamship/Stack Operator - International - Door to Door | | 82 | Steamship/Stack Operator - International - Door to Destination Ramp | | 85 | Steamship/Stack Operator - International Ramp to Ramp | | 87 | Steamship/Stack Operator - International - Origin Ramp to Door | A feature in Salesforce that enhances the user experience by providing interactive and customizable components within Salesforce applications. Revenova uses Lightning Web Components to deliver features that can be tailored to suit your specific needs and preferences.