--- title: "Winter '25 Revenova TMS Installation Guide" slug: "winter-25-revenova-tms-installation-guide" tags: ["TMS Admin", "Admin", "Winter '25"] updated: 2026-07-30T19:17:34Z published: 2026-07-30T19:17:34Z canonical: "documents.revenova.com/winter-25-revenova-tms-installation-guide" --- > ## Documentation Index > Fetch the complete documentation index at: https://documents.revenova.com/llms.txt > Use this file to discover all available pages before exploring further. # Winter '25 Revenova TMS Installation Guide ## **Winter ‘25 Installation Guide** ## Initial TMS Installation 1. Use these instructions only if you are a first-time installer of Revenova TMS. Go to the [**Upgrading from a Previous Version**](/previous-releases/docs/winter-25-revenova-tms-installation-guide#upgrading-from-a-previous-version) section to perform an upgrade of a previous release. 2. From **Setup → Lightning Email Templates** toggle *Folders and Enhanced Sharing* to **On**. 1. Create a new *Permission Set.* 1. From **Setup → Permission Sets**. 2. Click the **New** button at the top of the Permission Sets list. 3. Label the new Permission Set, *Manage Public Lightning Email Templates and Drag-and-Drop Content Builder*. 4. Click **Save**. 5. Click the link for System Permissions and click the **Edit** button. Search for these two permissions and add them to the Permission Set: 1. Manage Public Lightning Email Templates. 2. Access drag-and-drop content builder. 6. On the Permission Changes Confirmation modal, click **Save**. 2. Assign the *Manage Public Lightning Email Templates and Drag-and-Drop Content Builder* Permission Set to the logged in user completing the installation. 3. Obtain the URL and install the package, using the **Install for all Users** setting. 4. Wait a few minutes for the application to complete the installation process. You will receive an email upon completion of the installation. 5. From **Setup → Installed Packages** click on the **Manage Licenses** link for the TMS package and assign licenses to users. 6. From **Setup → State and Country/Territory Picklists** turn on **Country/State Picklists**. Start with the **United States** as the only country unless you have more information. 7. From **Setup → Data → Data Integration Rules** activate **Geocodes for Account Shipping Address**. 8. From **Setup → Enhanced Email**. Confirm that Enhanced Email is Enabled. 9. From **Setup → Workflow Rules**. Make sure the **TMS Auto-Reject Carrier** Transportation Profile workflow rule is active or an equivalent method to invalidate unacceptable carriers. 10. From **Setup → Duplicate Rules**. Turn off **Matching Rules** and **Duplicate Rules** for Accounts and Contacts as they can prevent auto-creation of accounts in the application. 11. From **Setup** → **Session Settings**. *Check* the **Use Lightning Web Security for Lightning web components and Aura components** setting to ensure all components meet Salesforce security standards. If this feature is not enabled, all Lightning Web Components may encounter errors during use. Click **Save**. 12. From **Object Manager**, navigate to the following objects. For each, click the **Edit** button. Under *Optional Features*, check the box for **Track Field History**. Click **Save**. 1. Carrier Quote 2. Carrier Quote Accessorial 3. Claim 4. Container 5. Customer Quote 6. Customer Quote Accessorial 7. Customer Quote Tax 8. Driver 9. EPayment 10. Fleet Asset 11. Line Item 12. Load 13. Load Accessorial 14. Load Reference 15. Sales Tax 16. Stop 17. Transportation Profile 13. Enable Feed Tracking for the following objects. This enables the Chatter feature across Fleet Management. (Only enable for Fleet Management) 1. From **Setup** → **Feed Tracking**, select to the following objects. 2. *Check* **Enable Feed Tracking**. 3. Click **Save**. 1. Driver 2. Fleet Asset 3. Load 4. Trip Plan 14. From **TMS Admin → Configuration** click on the **Reset Reference Data** button ONCE. Wait for this process to complete. 15. From **TMS Admin → Configuration** fill out all the fields in the top section with valid values. 16. Create a global (broker) transportation profile as the global default and set it from **TMS Admin → Configuration**. 17. From **TMS Admin → Equipment Types** set the four load board equipment types by visiting and filling out all information on each **Equipment Type** record. 18. From **Setup → Chatter Settings** enable Chatter. 19. From **Setup → Trusted URLs** add a new trusted URL for ALK Maps: ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Initial%20Install%201.png) 20. Make sure these custom **Account fields** are displayed for TMS users, properly secured: 1. TMS Type 2. Transportation Profile 3. DBA Name 4. Customer Sales Rep 5. Default Payment Method 6. Posting City 7. Posting State/Province 8. Time zone 21. Make sure the **Transportation Role** field is displayed for TMS users on the Contact page layout. 22. Provide appropriate CRUD access to each user profile for each TMS object. 23. Tailor page layouts and lightning record pages as appropriate for each profile. 24. Please refer to **Getting Started with Revenova** and the Revenova Knowledge Base for detailed descriptions, configuration settings, and customizations available in the application. ## **Upgrading from a Previous Version** You must perform each set of upgrade tasks (EXCEPT for the package installation step which can skip from any release to the latest) if you are upgrading from a release prior to the previous release. Follow the upgrade steps from the **oldest release to the newest release**, in order, for any upgrades that span multiple releases. ### Release Winter ‘25 TMS Upgrade Instructions (ETC: 45 minutes) **Accounting Package Compatibility** Prior to TMS package installation, confirm there is a compatible accounting package version for the options below. - Sage API (Sage 300) - Sage Flat File - Dynamics GP Contact Professional Services with any questions. Accounting Seed customers must have **BOTH** the **TMS** and **Accounting Seed Bridge** packages before upgrading. Complete the TMS Upgrade installation before installing the Accounting Seed Bridge package. See the Accounting Seed Bridge installation instructions for more information. **Items in** **blue** **are optional and may be skipped if the feature is not used. Structural changes in** **red** **are required.** 1. You must **install and test in a sandbox** **environment** before upgrading to the production environment. 2. You must have installed and completely configured the **Fall ‘24 Release** before installing this release. 3. **SFDC/TMS Pre-Configuration** 1. For Accounting Seed customers, do not install this TMS release until you have the Accounting Seed Bridge package URL also. They must be upgraded at the same time. 2. From **Setup → Duplicate Rules**. Turn off **Matching Rules** and **Duplicate Rules** for Accounts and Contacts as they can prevent auto-creation of accounts in the application. 3. From **Setup** **→** **Data** **→** **Data Integration Rules** activate **Geocodes for Account Shipping Address**. 4. From **Setup → State and Country/Territory Picklists** turn on **Country/State Picklists.** Start with the **United States** as the only country unless you have more information. These picklists should be enabled unless there is a backward-compatibility issue with other packages or customizations. 5. From **Setup** → **Session Settings**. *Check* the **Use Lightning Web Security for Lightning web components and Aura components** setting to ensure all components meet Salesforce security standards. Click **Save**. > [!WARNING] > Thoroughly test any custom Lightning Web Components when enabling this setting. All TMS components are tested to support this functionality. 6. From the **Object Manager**, make sure no values were added to the Load object’s **Sales Status** or **Load Status** picklist fields or the Stop object’s **Stop Status** picklist field. > [!NOTE] > For trouble deleting items in the Lightning UI, change to **Classic UI** to perform the deletions. 4. Confirm the two picklist options are available for the **Customer Portal Quote Visibility** field on the *User* object. 1. From **Setup** → **Object Manager** navigate to the *User* object. 2. Select the *Fields & Relationships* tab. Choose the **Customer Portal Quote Visibility** field. 3. In the Values section, confirm *All Quotes - Sort by Fastest Transit* and *All Quotes - Sort by Lowest Cost* are available. 4. If present move to Step 5. 5. If not present, click **New** under the *Values* section. 6. Enter *All Quotes - Sort by Fastest Transit* and/or *All Quotes - Sort by Lowest Cost* as needed. 7. Click **Save**. 5. Add two required picklist options before installing the upgrade package. 1. From **Setup** → **Object Manager** navigate to the *Fuel Card* object. 2. Select the *Fields & Relationships* tab. Choose the **Fuel Card Provider** field. 3. In the Values section, click the **New** button. 4. Enter *Comdata* in the box and click **Save**. 5. Choose the **Status** field. 6. In the Values section, click the **New** button. 7. Enter *Permanent Hold* in the box and click **Save**. 6. Turn off the **FuelCardTransactionsJob**. This job is removed as part of the upgrade to the Winter ‘25 package and replaced with the **FuelCardJob**. See [Batch Process](/previous-releases/docs/winter-25-batch-processes) documentation for more information. 7. > [!WARNING] > The DAT integration is updating to the new REST endpoints. These new integration endpoints require new org and individual credentials in order to function properly. Please contact a DAT representative to receive these credentials prior to installing the Winter ‘25 TMS upgrade. 8. Confirm that a Driver Status Picklist Value Set includes a specific value before upgrading. 1. From **Setup**, search for and select **Picklist Value Sets**. 2. Choose the *Driver Status* **Picklist Value Set**. 3. Confirm the *No Status* value is present in the **Values** section. If not, add the value by following the steps below. 1. In the **Values** section, click the **New** button. 2. Enter *No Status* in the box. 3. *Check* the **Add the new picklist value to all Record Types that use this Global Value Set** box. 4. Click **Save**. 5. The **API Name** for the value must be *No Status*. If necessary, change the **API Name** value by choosing the *Edit* link and changing the value. Click **Save**. 9. Obtain the **Winter ‘25 installation URL and password** from your Revenova representative. 10. Install the upgrade. 1. Select *Install for All Users*. 2. Click **Upgrade**. 3. Check the *Yes, grant access to these third-party web sites* box. 4. Click **Continue**. 5. In Setup, find *Deployment Status* and click the link to view the progress of the installation. 6. Wait for the *Installation succeeded* email. > [!NOTE] > Several new objects and fields are included in the TMS Winter ‘25 release. Set CRUD access for the objects and/or fields accordingly. > [!WARNING] > Warning: > > Upgrade installations do not add any objects or fields to custom permission sets. Add new fields as necessary to any custom permission sets. New fields are added automatically to Revenova packaged permission sets and do not require additional setup. > > Custom permission sets are commonly used for: > > Carrier Community > > Carrier Email Loop Customer Community > > Customer Email Loop > > Fleet Email Loop 11. From **TMS Admin →** **Configuration** click on the **Reset Reference Data** button **ONCE** and wait for the email indicating completion. This process completes the following tasks. > [!WARNING] > Confirm that the **Session Security Level Required at Login** field is set to *None* on the Profile for the user completing the Reset Reference Data step. If the value is set to *High Assurance*, the Reset Reference Data does not complete all tasks. > > After completing the Reset Reference Data step, return the **Session Security Level Required at Login** field to the original value. > > ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Installation Guide - 5.png) 1. Creates the **OpenAI** credentials card under TMS Admin → Credentials. 2. Inserts two AI models for use in the AI Console. 1. gpt-4o 2. gpt-4o-mini 3. Updates and adds the **Comdata v2.1** card to the Comdata credential card under TMS Admin → Credentials. 4. Creates the **Highway** credentials card under TMS Admin → Credentials. 5. The Fuel Card **Assignment Type** field value is set to *Driver* for any existing fuel card records. 6. Inserts the following picklist values. (Object → **Field** → *Picklist Value*) 1. Fuel Card → **Fuel Card Provider** → *Comdata*. 1. The following field dependency is set on the Fuel Card → **Card Type** field. ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Field Dependency - Install Guide - 1.png) 2. If necessary, include the values as shown above and click **Save**. 3. *EFS* is set as the default value for the **Fuel Card Provider** field. 2. Fuel Card → **Status** → *Lost*. 3. Inbound Email → **Status** → *Error*. 4. Insurance Policy → **Source** → *Highway*. 5. Insurance Policy → **Type** → *Contingent Auto,* *Contingent Cargo*, *Trailer Interchange*. 6. Load Posting → **Load Board** → *DAT 2*. 7. Trip Event → **Event Type** → *Accessorial Review*. 8. Trip Plan → **Status** → *Pending Final*. 9. Trip Plan Segment → **Status** → *Pending Final*. 10. Truck Posting → **Source** → *Artimus*. > [!WARNING] > Any errors encountered while running the Release Update Job are sent to the email account for the User running the job. Errors can also be found in the Apex Jobs view. 12. Upgrade from the sunsetting DAT SOAP endpoints to the REST endpoints. **All orgs that utilize the DAT integration should complete this step.** 1. Enter new Credentials on the DAT 2 credentials card under TMS Admin → Credentials. 2. See additional setup information [here](/previous-releases/docs/winter-25-dat). > [!WARNING] > The DAT integration is updating to the new REST end points. These new integration endpoints require new org and individual credentials in order to function properly. Please contact a DAT representative to receive these credentials. 13. Configure the Artimus™ AI feature by completing the following steps. 1. Add the following fields to the appropriate page layouts and lightning record pages. 1. From **Setup** → **Object Manager** navigate to the *Inbound Email* object. 2. Select the **Page Layouts** tab. Choose the Inbound Email page layout. 3. Add the **Type** and **Error Detail** fields to the page layout. 4. Click **Save**. 5. Select the **Lightning Record Pages** tab. Choose the Inbound Email page. 6. Add the **Type** and **Error Detail** fields to the page. 7. Click **Save**. 8. Navigate to the *Load* object. 9. Select the **Page Layouts** tab. Choose the appropriate Load page layout. 10. Add the **AI Generated** and **AI Confidence Score** fields to the page layout. 11. Click **Save**. 12. Select the **Lightning Record Pages** tab. Choose the appropriate Load page. 13. Add the **AI Generated** and **AI Confidence Score** fields to the page. 14. Click **Save**. 15. Navigate to the *Truck Posting* object. 16. Select the **Page Layouts** tab. Choose the appropriate Truck Posting page layout. 17. Add the **AI Generated** and **AI Confidence Score** fields to the page layout. 18. Click **Save**. 19. Select the **Lightning Record Pages** tab. Choose the appropriate Truck Posting page. 20. Add the **AI Generated** and **AI Confidence Score** fields to the page. 21. Click **Save**. 22. Navigate to the *Mode* object. 23. Select the **Page Layouts** tab. Choose the appropriate Mode page layout. 24. Add the **AI Enabled** field to the page layout. 25. Click **Save**. 26. Select the **Lightning Record Pages** tab. Choose the appropriate Mode page. 27. Add the **AI Enabled** field to the page. 28. Click **Save**. 29. Navigate to the *Transportation Profile* object. 30. Select the **Page Layouts** tab. Choose the appropriate Transportation Profile page layout. 31. Add the **AI Generated Customer Quote Status** field to the page layout. 32. Click **Save**. 33. Select the **Lightning Record Pages** tab. Choose the appropriate Transportation Profile page. 34. Add the **AI Generated Customer Quote Status** field to the page. 35. Click **Save**. 14. Setup the Highway Carrier Onboarding integration by completing the following steps. See [Highway](/previous-releases/docs/winter-25-highway-carrier-onboarding-and-monitoring) documentation for more specific setup instructions. 1. Add the following fields to the appropriate page layouts and lightning record pages. 1. From **Setup** → **Object Manager** navigate to the following *Transportation Profile* object. 2. Select the **Page Layouts** tab. Choose the appropriate Carrier page layout. 3. Add the **Highway ID** and **Connection Status** fields to the page layout. 4. Click **Save**. 5. Select the **Lightning Record Pages** tab. Choose the appropriate Carrier page. 6. Add the **Highway ID** and **Connection Status** fields to the page. 7. Click **Save**. 15. Setup the Comdata Fuel Card integration by completing the following steps. See additional setup information [here](/previous-releases/docs/winter-25-comdata-fuel-cards). 1. Add the following fields to the appropriate page layouts and lightning record pages. 1. From **Setup** → **Object Manager** navigate to the *Driver* object. 2. Select the **Page Layouts** tab. Choose the appropriate Driver page layout. 3. Add the **Fuel Card Driver Number** field to the page layout. 4. Click **Save**. 5. Select the **Lightning Record Pages** tab. Choose the appropriate Driver page. 6. Add the **Fuel Card Driver Number** field to the page. 7. Click **Save**. 8. Navigate to the *Fleet Asset* object. 9. Select the **Page Layouts** tab. Choose the appropriate Fleet Asset page layout. 10. Add the **Fuel Card Unit Number** field to the page layout. 11. Click **Save**. 12. Select the **Lightning Record Pages** tab. Choose the appropriate Fleet Asset page. 13. Add the **Fuel Card Unit Number** field to the page. 14. Click **Save**. 15. Navigate to the *Fuel Card* object. 16. Select the **Page Layouts** tab. Choose the appropriate Fuel Card page layout. 17. Add the following fields to the page layout. 1. Allow Cash Off Network (*Set this field as Read Only*) 2. Asset 3. Assignment Type 4. ATM Access (*Set this field as Read Only*) 5. Card Balance (*Set this field as Read Only*) 6. Card Type 7. Cash Enabled (*Set this field as Read Only*) 8. Cash Limit (*Set this field as Read Only*) 9. Cash Reset Day(s) of Week (*Set this field as Read Only*) 10. Cash Used (*Set this field as Read Only*) 11. Diesel Gallon Limit (*Set this field as Read Only*) 12. Employee Number 13. Expiration Date 14. Fuel Card Provider 15. Fuel Limit (*Set this field as Read Only*) 16. Fuel Purchase Allowed (*Set this field as Read Only*) 17. Fuel Reset Day(s) of Week (*Set this field as Read Only*) 18. Fuel Used (*Set this field as Read Only*) 19. Masked Card Number (*Set this field as Read Only*) 20. Multiple Transactions in an Hour (*Set this field as Read Only*) 21. One Time Cash Limit (*Set this field as Read Only*) 22. One Time Fuel Limit (*Set this field as Read Only*) 23. Reefer Gallon Limit (*Set this field as Read Only*) 18. Click **Save**. 19. Select the **Lightning Record Pages** tab. Choose the appropriate Fuel Card page. 20. Add the following fields to the page. 1. Allow Cash Off Network (*Set this field as Read Only*) 2. Asset 3. Assignment Type 4. ATM Access (*Set this field as Read Only*) 5. Card Balance (*Set this field as Read Only*) 6. Card Type 7. Cash Enabled (*Set this field as Read Only*) 8. Cash Limit (*Set this field as Read Only*) 9. Cash Reset Day(s) of Week (*Set this field as Read Only*) 10. Cash Used (*Set this field as Read Only*) 11. Diesel Gallon Limit (*Set this field as Read Only*) 12. Employee Number 13. Expiration Date 14. Fuel Card Provider 15. Fuel Limit (*Set this field as Read Only*) 16. Fuel Purchase Allowed (*Set this field as Read Only*) 17. Fuel Reset Day(s) of Week (*Set this field as Read Only*) 18. Fuel Used (*Set this field as Read Only*) 19. Masked Card Number (*Set this field as Read Only*) 20. Multiple Transactions in an Hour (*Set this field as Read Only*) 21. One Time Cash Limit (*Set this field as Read Only*) 22. One Time Fuel Limit (*Set this field as Read Only*) 23. Reefer Gallon Limit (*Set this field as Read Only*) 21. Click **Save**. 22. Navigate to the *Fuel Card Advance* object. 23. Select the **Page Layouts** tab. Choose the appropriate Fuel Card Advance page layout. 24. Add the following fields to the page layout. 1. Amount Loaded 2. Fees (*Set this field as Read Only*) 3. Load 4. Subtract Fees 25. Click **Save**. 26. Select the **Lightning Record Pages** tab. Choose the appropriate Fuel Card Advance page. 27. Add the following fields to the page. 1. Amount Loaded 2. Fees (*Set this field as Read Only*) 3. Load 4. Subtract Fees 28. Click **Save**. 29. Navigate to the *Fuel Card Transaction* object. 30. Select the **Page Layouts** tab. Choose the appropriate Fuel Card Transaction page layout. 31. Add the following fields to the page layout. 1. Comdata Key 2. Driver 3. Fleet Asset 4. Invoice Number 32. Click **Save**. 33. Select the **Lightning Record Pages** tab. Choose the appropriate Fuel Card Transaction page. 34. Add the following fields to the page. 1. Comdata Key 2. Driver 3. Fleet Asset 4. Invoice Number 35. Click **Save**. 2. When setup is complete, stop the obsolete FuelCardTransactionJob and run the new FuelCardJob. 16. Add preferred currency support for the Project44 integration. 1. Add the following field to the Load lightning record page. 1. Navigate a Load and select **Setup → Edit Page**. 2. Add the **Carrier Quote Preferred Currency** field to the page. 3. Click **Save**. 2. Add the **Carrier Quote Preferred Currency** field to the Load TMS1 field set when creating Loads. 1. Navigate to **Setup → Object Manager**. 2. Search for and select the *Load* object. 3. Choose the Field Sets tab and select TMS1. 4. Add the Carrier Quote Preferred Currency to the field set. 5. Click **Save**. 17. *Check* the **Enable Lane Preferences** field from TMS Admin → Configuration. Complete the setup process described [here](/previous-releases/docs/winter-25-lane-preferences). 18. Changes to the Falvey insurance integration require additional setup. 1. Any org that created a flow to address an issue with .PDF link URL must deactivate that flow. The issue where the URL did not return correctly has been fixed and a flow is no longer required. 19. Update the Service URL and Test Service URL fields for all authorized users ***if*** ***continuing to use the DAT SOAP endpoints***. Skip this step if using the new DAT 2 credentials for the REST endpoints. 1. Navigate to TMS Admin → Credentials. 2. Copy the following URL into the Service URL: https://cnx.dat.com/TfmiRequest 3. Copy the following URL into the Test Service URL: https://cnx.staging.dat.com/TfmiRequest 4. Click **Save**. 5. Complete these steps for each DAT authorized user. Note: This card is deleted when DAT sunsets their SOAP end points. It is recommended to transition to the new DAT REST end points with the steps above. 20. Make sure all required TMS batch jobs are running and/or scheduled. See the Batch Processes article for suggested run times. #### Release Winter ‘25 Field/Field Set Modification Summary – TMS > [!NOTE] > Review fields added by the installation. Set CRUD access as needed. | **Object** | **Field/Field Set** | **Action** | **Notes** | | --- | --- | --- | --- | | AI Model | | Add | New object for AI Load/Truck Posting support. | | AI Model | API Name | Add | Support for AI Load/Truck Posting. | | AI Model | Enabled | Add | Support for AI Load/Truck Posting. | | AI Model | Is Custom Model | Add | Support for AI Load/Truck Posting. | | AI Model | Is Trained | Add | Support for AI Load/Truck Posting. | | AI Model | Model Name | Add | Support for AI Load/Truck Posting. | | AI Model | Parent Model | Add | Support for AI Load/Truck Posting. | | AI Model | Parent Model API Name | Add | Support for AI Load/Truck Posting. | | AI Model Training Record | | Add | New object for AI Load/Truck Posting support. | | AI Model Training Record | AI Model Training Set | Add | Support for AI Load/Truck Posting. | | AI Model Training Record | AI Parsed Text | Add | Support for AI Load/Truck Posting. | | AI Model Training Record | Model Output | Add | Support for AI Load/Truck Posting. | | AI Model Training Record | Name | Add | Support for AI Load/Truck Posting. | | AI Model Training Record | System Prompts | Add | Support for AI Load/Truck Posting. | | AI Model Training Record | Type | Add | Support for AI Load/Truck Posting. | | AI Model Training Record | User Prompt | Add | Support for AI Load/Truck Posting. | | AI Model Training Session | | Add | New object for AI Load/Truck Posting support. | | AI Model Training Session | AI Model | Add | Support for AI Load/Truck Posting. | | AI Model Training Session | AI Model Training Set | Add | Support for AI Load/Truck Posting. | | AI Model Training Session | API Session ID | Add | Support for AI Load/Truck Posting. | | AI Model Training Session | Name | Add | Support for AI Load/Truck Posting. | | AI Model Training Session | Status | Add | Support for AI Load/Truck Posting. | | AI Model Training Set | | Add | New object for AI Load/Truck Posting support. | | AI Model Training Set | API File ID | Add | Support for AI Load/Truck Posting. | | AI Model Training Set | Description | Add | Support for AI Load/Truck Posting. | | AI Model Training Set | Name | Add | Support for AI Load/Truck Posting. | | AI Model Training Set | Upload Status | Add | Support for AI Load/Truck Posting. | | AI Parsed Text | | Add | New object for AI Load/Truck Posting support. | | AI Parsed Text | Carrier Service | Add | Support for AI Load/Truck Posting. | | AI Parsed Text | Contact | Add | Support for AI Load/Truck Posting. | | AI Parsed Text | Created Record Count | Add | Support for AI Load/Truck Posting. | | AI Parsed Text | Customer | Add | Support for AI Load/Truck Posting. | | AI Parsed Text | Input Text | Add | Support for AI Load/Truck Posting. | | AI Parsed Text | Name | Add | Support for AI Load/Truck Posting. | | AI Parsed Text | Output | Add | Support for AI Load/Truck Posting. | | AI Parsed Text | Record Creation Status | Add | Support for AI Load/Truck Posting. | | AI Parsed Text | Send Customer Quote | Add | Support for AI Load/Truck Posting. | | AI Parsed Text | System Prompts | Add | Support for AI Load/Truck Posting. | | AI Parsed Text | Type | Add | Support for AI Load/Truck Posting. | | AI Parsed Text Record | | Add | New object for AI Load/Truck Posting support. | | AI Parsed Text Record | AI Parsed Text | Add | Support for AI Load/Truck Posting. | | AI Parsed Text Record | Name | Add | Support for AI Load/Truck Posting. | | AI Parsed Text Record | Record ID | Add | Support for AI Load/Truck Posting. | | Driver | Fuel Card Driver Number | Add | Support for Comdata Fuel Card functionality. | | Fleet Asset | Fuel Card Unit Number | Add | Support for Comdata Fuel Card functionality. | | Fuel Card | Allow Cash Off Network | Add | Support for Comdata Fuel Card functionality. | | Fuel Card | Asset | Add | Support for Comdata Fuel Card functionality. | | Fuel Card | Assignment Type | Add | Support for Comdata Fuel Card functionality. | | Fuel Card | ATM Access | Add | Support for Comdata Fuel Card functionality. | | Fuel Card | Card Balance | Add | Support for Comdata Fuel Card functionality. | | Fuel Card | Card Type | Add | Support for Comdata Fuel Card functionality. | | Fuel Card | Cash Enabled | Add | Support for Comdata Fuel Card functionality. | | Fuel Card | Cash Limit | Add | Support for Comdata Fuel Card functionality. | | Fuel Card | Cash Reset Day(s) of Week | Add | Support for Comdata Fuel Card functionality. | | Fuel Card | Cash Used | Add | Support for Comdata Fuel Card functionality. | | Fuel Card | Diesel Gallon Limit | Add | Support for Comdata Fuel Card functionality. | | Fuel Card | Employee Number | Add | Support for Comdata Fuel Card functionality. | | Fuel Card | Expiration Date | Add | Support for Comdata Fuel Card functionality. | | Fuel Card | Fuel Card Provider | Modify | Support for Comdata Fuel Card functionality. Add *Comdata* to picklist options. | | Fuel Card | Fuel Limit | Add | Support for Comdata Fuel Card functionality. | | Fuel Card | Fuel Purchase Allowed | Add | Support for Comdata Fuel Card functionality. | | Fuel Card | Fuel Reset Day(s) of Week | Add | Support for Comdata Fuel Card functionality. | | Fuel Card | Fuel Used | Add | Support for Comdata Fuel Card functionality. | | Fuel Card | Hashed Card Number | Add | Support for Comdata Fuel Card functionality. | | Fuel Card | Masked Card Number | Add | Support for Comdata Fuel Card functionality. | | Fuel Card | Multiple Transactions in an Hour | Add | Support for Comdata Fuel Card functionality. | | Fuel Card | One Time Cash Limit | Add | Support for Comdata Fuel Card functionality. | | Fuel Card | One Time Fuel Limit | Add | Support for Comdata Fuel Card functionality. | | Fuel Card | Reefer Gallon Limit | Add | Support for Comdata Fuel Card functionality. | | Fuel Card | Status | Modify | Support for Comdata Fuel Card functionality. Add *Permanent Hold* and *Lost* as picklist options. | | Fuel Card Advance | Amount Loaded | Add | Support for Comdata Fuel Card functionality. | | Fuel Card Advance | Fees | Add | Support for Comdata Fuel Card functionality. | | Fuel Card Advance | Load | Add | Support for Comdata Fuel Card functionality. | | Fuel Card Advance | Subtract Fees | Add | Support for Comdata Fuel Card functionality. | | Fuel Card Authority | | Add | New object for Comdata Fuel Card functionality. | | Fuel Card Authority | Fuel Card Authority Name | Add | Support for Comdata Fuel Card functionality. | | Fuel Card Authority | Fuel Card Permissions | Add | Support for Comdata Fuel Card functionality. | | Fuel Card Authority | User | Add | Support for Comdata Fuel Card functionality. | | Fuel Card Transaction | Comdata Key | Add | Support for Comdata Fuel Card functionality. | | Fuel Card Transaction | Driver | Add | Support for Comdata Fuel Card functionality. | | Fuel Card Transaction | Fleet Asset | Add | Support for Comdata Fuel Card functionality. | | Fuel Card Transaction | Invoice Number | Add | Support for Comdata Fuel Card functionality. | | Inbound Email | Error Detail | Add | Email to Load/Truck Posting support. | | Inbound Email | Status | Modify | Add *Error* value to picklist options. | | Inbound Email | Type | Add | Email to Load/Truck Posting support. | | Insurance Policy | Source | Modify | Add *Highway* value to picklist options. | | Insurance Policy | Type | Modify | Add *Contingent Auto*, *Contingent Cargo,* and *Trailer Interchange* values to picklist options. | | Lane Preference | | Add | New object for Lane Preference functionality. | | Lane Preference | Effective Date | Add | Support for Lane Preference functionality. | | Lane Preference | Expiration Date | Add | Support for Lane Preference functionality. | | Lane Preference | Lane | Add | Support for Lane Preference functionality. | | Lane Preference | Name | Add | Support for Lane Preference functionality. | | Lane Preference | Notes | Add | Support for Lane Preference functionality. | | Lane Preference | Transportation Profile | Add | Support for Lane Preference functionality. | | Lane Preference Carrier Service | | Add | New object for Lane Preference functionality. | | Lane Preference Carrier Service | Carrier Service | Add | Support for Lane Preference functionality. | | Lane Preference Carrier Service | Equipment Type | Add | Support for Lane Preference functionality. | | Lane Preference Carrier Service | Lane Preference | Add | Support for Lane Preference functionality. | | Lane Preference Carrier Service | Name | Add | Support for Lane Preference functionality. | | Lane Preference Carrier Service | Target Rate | Add | Support for Lane Preference functionality. | | Load | AI Confidence Score | Add | Email to Load/Truck Posting support. | | Load | AI Generated | Add | Email to Load/Truck Posting support. | | Load | Carrier Quote Preferred Currency | Add | Support for Project44 currency codes. | | Load | TMS3 Field Set | Modify | Support for the Artimus™ AI Console. | | Load Posting | Load Board | Modify | Add *DAT 2* to picklist options. | | Mode | AI Enabled | Add | Support for AI Load/Truck Posting. | | Mode | Highway Mode | Add | Support for Highway integration. | | Transportation Profile | AI Generated Customer Quote Status | Add | Support for AI Load/Truck Posting. | | Transportation Profile | Connection Status | Add | Support for Highway integration. | | Transportation Profile | Highway ID | Add | Support for Highway integration. | | Transportation Profile | Last Carrier Review Date | Modify | Inline Help Text includes SAFER/RMIS/Highway | | Trip Event | Event Type | Modify | Add *Accessorial Review* to picklist options. | | Trip Plan | Status | Modify | Add *Pending Final* as a picklist value. | | Trip Plan Leg Accessorial | | Add | New object for Fleet Driver pay functionality. | | Trip Plan Leg Accessorial | Accessorial | Add | Support for Fleet Driver pay. | | Trip Plan Leg Accessorial | Comment | Add | Support for Fleet Driver pay. | | Trip Plan Leg Accessorial | Name | Add | Support for Fleet Driver pay. | | Trip Plan Leg Accessorial | Payable | Add | Support for Fleet Driver pay. | | Trip Plan Leg Accessorial | Quantity | Add | Support for Fleet Driver pay. | | Trip Plan Leg Accessorial | Total | Add | Support for Fleet Driver pay. | | Trip Plan Leg Accessorial | Trip Plan Leg | Add | Support for Fleet Driver pay. | | Trip Plan Leg Accessorial | Unit | Add | Support for Fleet Driver pay. | | Trip Plan Leg Accessorial | Unit Price | Add | Support for Fleet Driver pay. | | Trip Plan Segment | Status | Modify | Add *Pending Final* as a picklist value. | | Truck Posting | AI Confidence Score | Add | Support for AI truck postings. | | Truck Posting | AI Generated | Add | Support for AI truck postings. | | Truck Posting | Source | Modify | Support for AI truck postings. |