--- title: "TMS 7.11 Installation Instructions" slug: "tms-711-installation-instructions" tags: ["Compiled from User Guide", "Fleet Management", "7.11"] updated: 2024-06-28T20:25:14Z published: 2024-06-28T20:25:14Z canonical: "documents.revenova.com/tms-711-installation-instructions" --- > ## Documentation Index > Fetch the complete documentation index at: https://documents.revenova.com/llms.txt > Use this file to discover all available pages before exploring further. # TMS 7.11 Installation Instructions ## **Overview** ## Installation Instructions 1. Expose the **Fleet Management** application (grouping of tabs) to appropriate users. Create your own Fleet management tab grouping as needed. 2. Provide access to the **Dispatch Console** tab as needed. 3. Install **Samsara ELD** devices in all Fleet Asset tractors/trucks. 4. Install **Samsara Driver Phone Application** on all driver smart phones. 5. From the **Samsara Management Application:** 1. Add all **driver documents** using the names defined in the Customer Invoice Documents table. 2. Add the following **required field** to all driver document types: 1. **Is Proof of Delivery** (“Yes” or “No”) 3. Configure your **web hook** for push alerts. 4. Configure your **push alert types** and thresholds. 5. From **Settings →** **Fleet →** **Driver App** review setup parameters. 6. From **Settings →** **Fleet →** **Dispatch** review setup parameters. 6. Create the **Fleet Management default carrier** that all/many Fleet loads and drivers will be associated with. 7. Create **stored rates** for the default carrier for all Fleet lanes. 8. Set the **Fleet Loads Only** field correctly for all stored rates. 9. From **TMS Admin →** **Configuration** set the Fleet Management configuration parameters appropriately. 10. Enter Samsara credentials from **TMS Admin →** **Credentials**. 11. Provide **CRUD access** to the new tabs, tables, and fields described above. 12. Add the **Account ELD** related list to shipper/consignee **account** page layout(s). 13. Add the **Fleet Assignment** related list to fleet-related **load** page layout(s). 14. If a current Samsara customers, from **TMS Admin** → **Configuration** click on the **ELD Location Download** button to sync all current ELD locations with accounts (via the creation of **Account ELD** records). Wait for the process to complete and then spot-check Account ELD records with Samsara locations. 15. If you **pre-load Driver records** makes sure the **CDL # and CDL State/Province** fields are correct (and the same as on Samsara if an existing Samsara customer). 16. If you **pre-load Fleet Asset** records make sure the **VIN** field is correct (and the same as on Samsara if an existing Samsara customer). 17. Start the **Fleet Management Job**. 18. After letting the job run for [total shipping location account records/1000 * 15 minutes], manually populate the **Timezone** field on all accounts where the value is **Unknown**. 19. If you **change the geofence** of a Samsara location from **Circle** to **Polygon** using the Samsara application, first change the **Geofence Type** field to **Polygon** on the related **Account ELD** record(s). Polygon geofence accounts **are NOT updated** from TMS → Samsara as the creation of the polygon on Samsara changes the underlying latitude/longitude data for the address.