--- title: "TMS 7.11 Customer Credit Limit Management" slug: "tms-711-customer-credit-limit-management" tags: ["7.11", "Compiled from User Guide", "Customer Quotes", "Freight Plans", "Admin"] updated: 2024-06-28T20:25:14Z published: 2024-06-28T20:25:14Z canonical: "documents.revenova.com/tms-711-customer-credit-limit-management" --- > ## Documentation Index > Fetch the complete documentation index at: https://documents.revenova.com/llms.txt > Use this file to discover all available pages before exploring further. # TMS 7.11 Customer Credit Limit Management ## **Overview** ## **Customer Credit Limit Management** Customer credit limits can be enforced **internally and on the customer portal** by turning on this feature from the **TMS Admin →** **Configuration** page: ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/image-1696598722499.png) For each customer **Transportation Profile**, manually set the appropriate credit limit: ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/image-1696598765333.png) This job automatically calculates the **A/R Unbilled, A/R Current, A/R Past Due, Credit Limit Available,** and **Credit Limit Utilized** values. > [!WARNING] > Warning: > > Make sure the ARCalculationJob batch job is scheduled to run every morning. > [!NOTE] > The A/R calculation only considers the past 15 months' data. It is assumed that older quotes/invoices are closed or written off. This job automatically calculates the **A/R Unbilled, A/R Current, A/R Past Due, Credit Limit Available,** and **Credit Limit Utilized** values. > [!NOTE] > Customer Quotes with the **A/R Ignore** flag set to “true” are not counted. The calculation below determines the amount in the **Credit Limit Available** field. **Credit Limit Available is equal to the Credit Limit minus the Credit Limit, the A/R Unbilled, the A/R Current, and A/R Past Due.** Whenever a load is created, these values are also recalculated, in order to keep the data “fresh” between daily batch updates. The Customer Quote **Credit Hold** flag is set to “true” when a Customer Quote is created under the following conditions: - If the **Quote Total** is greater than the **Credit Limit Available**. - If the Customer Transportation **Profile Credit Review Status** is set to **Credit Hold**. **You cannot tender the load this quote is for until this flag is unset.** Freight Plan Carrier loads cannot be tendered if they contain line items for a customer load on credit hold. The **Credit Limit Source** field on the Load record determines whether the **Customer** or the **Customer Bill To** is used for credit calculations and checks.