--- title: "Summer '25 Trip Planning" slug: "summer-25-trip-planning" tags: ["Fleet Management", "Admin", "Expanded Content", "End User"] updated: 2025-09-08T16:38:07Z published: 2025-11-04T19:05:19Z canonical: "documents.revenova.com/summer-25-trip-planning" --- > ## Documentation Index > Fetch the complete documentation index at: https://documents.revenova.com/llms.txt > Use this file to discover all available pages before exploring further. # Summer '25 Trip Planning Manage the Drivers, Fleet Assets, and Equipment necessary to move Loads by creating Trip Plans. Loads are moved by matching Fleet Assets and Drivers to a Load and creating Segments to route the Load accordingly. Trip Planning allows for managing the following Fleet tasks. - Add multiple Trucks and Drivers to a Trip - Manage Relay/Slip Seating - Coordinate Border Crossings - Plot Route Waypoints - Monitor Truck and Driver Calendars - Plan Repowers (Changing the Power Unit/Tractor in a Trip Plan) - Communicate via Chatter Select Trip Planning from the picklist in the banner to complete these actions. For initial setup information, see the article for the Fleet Management Module. ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Trip Planning - 1(1).jpg) The views selected as **Default For** *Trip Planning* are displayed. When the IFTA Mileage feature is enabled, users also see the IFTA Mileage Report button at the top of the Fleet Management Console when planning Trips. See IFTA Mileage and Tax Reporting for more information. ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Trip Planning - 2(1).jpg) ## **Trip Planning** Create views on the Fleet Management Console first before creating Trip Plans. Trip Plans are in the Local Date & Time of the Stop for that location. *Check* a Driver, Fleet Asset, and/or Load from views and click the **Plan Trip** button. Create Trip Plans for individual Drivers, Fleet Assets, or Loads by clicking the Trip Plans ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Trip Plans - 1(1).jpg) icon to open the Trip Planner LWC. ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Trip Planning - 3.jpg) ### **Trip Planner LWC** The Trip Planner Lightning Web Component is the primary component for creating and managing a Trip Plan to move Fleet Loads. Trip Plans are composed of Trip Plan Segments which are made of individual Trip Plan Legs. A Trip Plan Segment is made up of Trip Plan Legs. Segments and Legs may be added and removed as needed to manage the Drivers, Tractors, and Equipment necessary to move a Load. View, modify, and monitor Trip Plans, Segments, and Legs. *Check* Drivers, Fleet Assets, and/or Loads and click the **Plan Trip** button to create a new Trip Plan. ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Trip Plan LWC Sp - 1(1).png) Set the distance units for each Fleet User as necessary. If unavailable, first add the **Distance Units in Trip Planner** field to the User page layout. 1. From **Setup → Object Manager**, select the *User* object. 1. Select the **User Page Layouts** tab. 2. Add the **Distance Units in Trip Planner** field to the page layout. 3. Click **Save**. 2. Navigate to the User record for each Fleet User. 1. From **Setup** search for and select *Users*. 2. Choose each user record and perform the following actions. 1. Click the **Edit** button. 2. Set the **Distance Units in Trip Planner** field to one of the following values. Selecting *None* is treated as selecting *Miles and Kilometers*. 1. *Miles and Kilometers* (default) 2. *Miles* 3. *Kilometers* 3. Click **Save**. The Trip Plan banner buttons perform the following actions. - **Save** creates the Trip Plan record. - **Save & Close** creates the Trip Plan and closes the LWC. - **Apply Template** opens the Trip Plan Template List LWC and overlays an existing template onto the Trip Plan. - **Delete** removes the record. - The **Delete** button is only available for existing Trip Plan records. - Trip Plans may only be deleted if they do not have a Status of *Dispatched* or *Completed*. - **Close** exits the LWC and returns to the Fleet Management Console. - **Trip Events** ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Trip Events - 2(2).jpg) displays all Trip Events and alerts related to the Load included on the Trip Plan. - The **Trip Events** button is only available for existing Trip Plan records. - **Actuals** ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Actuals - 1(1).png) displays the Arrival and Departure dates and times for each Trip Plan Leg. - The Date and Time for the following Trip Plan Segment information is displayed. - Driver Confirmation Requested Date/Time - Driver Confirmation Accepted Date/Time - Driver Confirmation Declined Date/Time - Dispatch Date/Time - Undispatch Date/Time ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Trip Plan LWC Sp - 2.png) > [!WARNING] > The **Arrived** & **Departed** **Dates** and **Times** for ALL Legs must have values to update the Load **Status** to *Delivered*. ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Trip Plan LWC Sp - 3.png) - **Refresh** ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Refresh - 1.png) opens a modal with the two options below. Click the **X** icon or click outside of the modal to to return to the Trip Plan. - **Undo Changes and Refresh** removes any unsaved changes and the modal returns to the last saved state. - **Save and Refresh** saves the changes made to the Trip Plan. ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Trip Plan LWC Sp - 17.png) #### Trip Plans Create Trip Plans to manage the movement of Drivers, Fleet Assets, and/or Loads. ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Trip Plan LWC Sp - 4.png) Trip Plans consist of a **Type** field to define the following moves. - *Single Load* - One Load is moved across all Trip Plan Segments/Legs. - Load Numbers do not change on any Trip Plan Segment after Segment 1. - *Multiple Load* - Two or more Loads are moved with the Trip Plan. - Each Trip Plan Segment allows for a unique Load Number. - When switching from a Multiple Load Trip Plan to a Single Load, remove all Trip Plan Segments except for Segment 1. - *Asset Move* - Asset Moves do not require a Load. - Relocate Fleet Assets as necessary. When a Trip Plan is created, the default **Status** field is *Pending*. As Trip Plan information is completed the **Status** automatically updates. When the **Status** is *Configured*, the Trip Plan may be Dispatched. See the Status Flow Reference below for more specific information. Enter a **Description** to describe the Trip Plan to explain the use case for a Trip Plan Template. Check the **Is Template** field to create a Trip Plan Template. The summary roll-up fields provide total distances for the entire Trip Plan across all Segments. > [!WARNING] > All Trip Plan Leg locations must have a Time zone to successfully save the Trip Plan. Power Units/Tractors with an existing previous Trip Plan automatically load the last location into a new Trip Plan. #### Trip Plan Segments Trip Plan Segments contain Load movements in Start and End pairs. The first Leg of a Segment is the dispatch Leg. Add Segments when additional dispatches are required to continue moving the Load. The following tasks each require an additional dispatch. Add a Trip Plan Segment when any of the following occurs. - Load Number changes - Tractor/Power Unit changes - Driver changes/Slip Seating Each Trip Plan Segment has a **Status** field that contains the following values. As Segment information is completed, the **Status** is automatically updated. See the Status Flow Reference below for more information. - *Pending* - New Segments begin with a *Pending* value. - *Configured* - Segments must have the following values to update to *Configured*. - Power Unit - Driver - For Single or Multi-Load Trip Plans, a Load must be added. - Start Types and End Types - **Due Out Dates** and **Times**. - **Appointment Dates** and **Times**. - Driver Confirmation Status of *Accepted*. - *Dispatched* - The Segment **Status** changes from *Configured* to *Dispatched* when the **Dispatch** button is pressed. - *Completed* - The Segment Status changes from *Dispatched* to *Completed* when the final Leg has a **Departed Date**. ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Trip Plan LWC Sp - 5.png) Search and select Power Units/Tractors, Drivers, and Loads to add them to the Trip Plan Segment. If completing a Fleet Asset move, a Load is not required. **Power Unit/Tractor and Driver Pairings** The Fleet Management Module automatically creates pairings between a Power Unit/Tractor and a Driver. Saving a Trip Plan with the Power Unit and Driver creates this pairing. - This pairing is **not** a Driver Assignment. - These pairings may impact creating future Trip Plans. - Add the Power Unit/Tractor to automatically add the paired Driver to a new Trip Plan. When adding a Power Unit/Tractor to a Trip Plan, the Driver is auto-populated with the Power Unit/Tractor based on the following logic. Drivers in existing Driver Assignment records. 1. The Driver and Power Unit/Tractor are paired together in an existing Driver Assignment record. 1. The Driver Assignment is active and does not have an **End Date**. Driver Assignments with an **End Date** follow step 2. 2. The most recent Driver Assignment record pairing is used to populate the Trip Plan. 1. The most recent date is the Driver Assignment **End Date** closest to the **Due Out** date from the first Leg of the new Trip Plan. Drivers without an existing Driver Assignment record. 1. For Drivers without an existing Driver Assignment record, a search is completed for existing Trip Plan records to which they are added. 1. The most recent Trip Plan is used to pair the Driver to a Power Unit/Tractor. 1. The existing Trip Plan must have a Segment with a Driver paired with a Power Unit/Tractor. 2. The most recent Trip Plan is determined by the previous Trip Plan Segment **Start Date/Time** closest to the **Due Out** date for the first Leg of the new Trip Plan. 1. If no Trip Plan is found, a search is made for the most recent **Appointment Date** closest to Today’s Date. Trip Plan Segments with more than 1 Driver only populate the Power Unit/Tractor for the first Driver added to the Segment. > [!WARNING] > The pairings for a Driver and Power Unit/Tractor is not supported when selecting the Trip Plan icon for a Driver or Fleet Asset record from the Fleet Management Console. > > ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Trip Plan LWC Sp - 16.png) Several buttons display on the Segment depending on the **Status** field. Each is described below. ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Trip Plan LWC Sp - 6.png) - **Unseat on Completion** ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Unseat Driver - 1.jpg) removes the Driver from the Segment when the Segment is *Completed*. Each Segment must have a Confirmed Driver. This allows for Slip Seating or changing Drivers. - **Remove Driver** ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Remove Driver - 1.jpg) from the Trip Plan Segment. - **Show Driver HOS** ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/HOS icon - 1.png) for the Driver. Click the Driver Name to view the Driver record from the Driver Hours of Service modal. ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Driver HOS - 1.png) - **Add Driver** ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Add Driver - 1.jpg) displays a second Driver lookup with **Unseat on Completion** and **Remove Driver** buttons. - **Add Segment Above** ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Add Segment Above - 1.jpg) creates a Trip Plan Segment above the selected Segment. - **Add Segment Below** ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Add Segment Below - 1.jpg) creates a Trip Plan Segment below the selected Segment. - **Remove Segment** ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Remove Segment - 1.jpg) deletes the Trip Plan Segment from the Trip Plan. - **Dispatch** ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Dispatch - 1.jpg) sends the Trip Plan Segment to Trimble, and to the ELD integration Samsara or Catena. - Only available when Trip Plan **Status** is *Configured*. ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Trip Plan LWC Sp - 7.png) - **View Trip** ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/View Trip - 1.jpg) opens a modal and displays the Trip Plan Segment route from Trimble. - Only available when Trip Plan **Status** is *Dispatched*. - **Redispatch** ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Redispatch - 1.jpg) button sends the Trip Plan Segment route to Trimble, and to the ELD integration Samsara or Catena. - Only available when Trip Plan **Status** is *Configured*. - The **Dispatch** and **Redispatch** buttons perform the same actions. - **Undispatch** ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Undispatch - 1.jpg) button allows for changing Trip Plan Segment fields. The Trip Plan Segment and Trip Plan **Status** fields are set to *Pending*. The Driver Confirmation **Status** field returns to *Pending*. - **Message Driver** ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Message Driver icon - 1.png) button opens the Driver message modal. Enter a message in the modal and click **Send** or **Cancel** to return to the Trip Plan Segment. The message is sent by the ELD integration with Samsara or Catena. > [!NOTE] > The Catena or Samsara credentials card must be enabled to enable the message functionality. - A Driver must be added to the Trip Plan Segment and the **Driver Confirmation Status** must be any of the following values. ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Driver Messaging - 2.png) Outbound messages to drivers are sent immediately when the **Send** button is clicked. - *Requested* - *Accepted* - *Declined* 1. Select the Message Driver button on the Trip Plan Segment. 2. Enter the message in the text field. 3. Click **Send**. - When a Driver is removed from a Segment, the Driver is removed from subsequent Segments. - When a Power Unit is removed from a Segment, the Power Unit is removed from subsequent Segments. - When a Segment is Dispatched, additional Segments may only be added after the Dispatched Segment. - The summary roll-up fields provide distances for the Trip Plan Segment. When a Trip Plan has **Arrival** and **Departure Dates** and **Times** for the last Trip Plan Leg, the Load **Status** is set to *Pending Final*. The *Pending Final* status allows for reviewing Load financial information before releasing Fleet Assets and Drivers for another Load. Change the **Fleet Load Status** field on the Load to *Final*. Create a Load View Type view with the *Pending Final* Fleet Load Status to monitor Loads that require changing to a *Final* status. **Load Updates** When a Trip Plan Segment **Status** is *Dispatched* (or *Redispatched*), the following Load fields are updated based on the Trip Plan Segment information. All Trip Plan Segment Drivers are listed and the first populates the Load Driver information. Additional fields are updated from the Fleet Asset/Power Unit on the Trip Plan Segment. - **Driver** - Lookup(Contact) - **Driver Name** - **Driver Phone** - **Equipment Type** - Lookup(Equipment Type) from the Fleet Asset - **Tractor Number** - Fleet Asset Name If a Trip Plan Segment is *Undispatched*, all of the above fields are removed from the Load except for the **Equipment Type** field. The Load **Status** field returns to *Assigned*. Removing a Driver from a Trip Plan Segment and saving the records without *Undispatching* the Trip Plan Segment does not remove the Driver fields from the Load. - The **Customer Sales Rep** field is set any time the Load is updated. - The **Customer Sales Rep** field is set to the value on the customer Account record. - If no value is set on the Account record, no value is set. #### Fleet Driver Confirmation When a Driver or Drivers are added to a Trip Plan Segment, they must accept the Driver Assignment before the Segment updates to a *Configured* **Status**. The Fleet Driver Confirmation Lightning Web Component requires locations for each Leg on the Segment and a **Due Out Date** on the Dispatch Leg to complete the **Confirm Driver** action. Configure the following fields on TMS Admin → Configuration → Fleet Management to control the Driver Confirmation process. - *Check* the **Email Modal for Driver Confirmation** field to configure individual Driver Confirmation emails. - The modal provides the ability to update the following before sending. - Review the email before sending to the Driver. - Change the email template used. - Update the email subject line. - Add Dispatcher comments to the email. - When *Unchecked*, the **Confirm Driver** button sends the Driver Confirmation Email immediately. - The email template used is specified in Document Options. - *Check* the **Driver Decline Reason Required** to provide Driver’s with a modal to explain the reason for declining. - When this field is *Checked*, Drivers are required to provide a reason when declining a Load. - Add custom picklist values to give Drivers more decline reason options. 1. When Leg location and the Due Out Date are saved to the Segment, send the Segment information to the Driver. 2. Click the **Confirm Driver** button. 1. The Driver Confirmation modal opens allowing for adding Dispatcher Comments to the confirmation. (**Email Modal for Driver Confirmation** *Checked*) ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Driver Confirmation Modal - 1(1).png) ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Driver Confirmation Email - 1(1).png) 2. Sends an email to the Driver with Segment information. (**Email Modal for Driver Confirmation** *Unchecked*) 3. The Driver selects **Accept** or **Decline**. 1. When a Driver Declines a Segment, a Trip Event is generated. 1. If required, the Driver Decline Reason modal is displayed to the Driver. ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Driver Decline Reason - 1.png) The Driver selects **Decline** or **Cancel** to return to the Driver Confirmation. 2. Add custom reasons to the Trip Event **Driver Decline Reason** field as necessary. Create reports of Driver reject behavior based on responses. 2. Driver responses are processed by the Queued Transactions job. 4. The response is recorded by the Fleet Email Loop and processed as a Platform Event. > [!WARNING] > Sending the Fleet Driver Confirmation email can set field values for any associated Load(s). Trip Plans that contain a single or multiple Loads update the following fields if they do not have a value. > > - The **Carrier Sales Rep** field is set to the user that sends the Fleet Driver Confirmation email. See the Fleet Email Loop setup instructions for more information. See Document Options for additional changes to the Fleet Driver Confirmation email template. > [!NOTE] > Manually set the **Driver Confirmation Status** to *Accepted* when confirmed manually or by other methods. When the Trip Plan **Status** is *Configured* and the **Driver Confirmation Status** is *Accepted*, the Trip Plan Segment may be Dispatched. - The **Dispatch** button sends Segment information to ELD integrations Samsara or Catena. The Segment is also sent to Trimble for monitoring Trip Events. - Click the **Dispatch** button when manually dispatching Segments to continue the Fleet workflow. > [!WARNING] > When making Load, Tractor, or Driver changes to **Dispatched** Trip Plan Segments, the recommended flow is below. > > 1. Click **Undispatch**. > 1. The Trimble integration is called to cancel the route. > 2. The Samsara or Catena integration is called to cancel the driver dispatch. > 2. Make all necessary changes to the Trip Plan Segment. > 3. If necessary, complete the new Driver confirmation. > 4. Click **Redispatch**. > 1. The Trimble integration is called to create the route. > 2. The Samsara or Catena integration is called to dispatch the driver. > > In the case of a breakdown or repower, Undispatch the Segment. Create a new Segment with the Driver and another Power Unit/Tractor. The Leg starts at the location of the breakdown and continues the route. #### Trip Plan Legs Trip Plan Legs are movements between Start and End Types that make up a Trip Plan Segment. Start and End Types may be any of the following. - Load Stop - Distribution Center - An Account lookup of **TMS Type** *Distribution Center*. - Terminal - An Account lookup of **TMS Type** *Terminal*. - Location - An Account lookup. - Border Crossing - An Account lookup of **TMS Type** *Border Crossing*. - Waypoint Location - An Account lookup of **TMS Type** *Waypoint*. - Waypoint Address - Must be a valid address. - Address - Must be a valid address. Legs comprise the route for completing a Segment. The first Leg of a Trip Plan Segment is the Dispatch Leg. Leg numbers and distances are calculated automatically. Individual Legs are used to calculate distances that are stored in each Trip Plan Segment. *Check* the appropriate Leg flags to calculate specific distance information. Leg flags include the following values. - Loaded - If a Trip Plan Leg is not *Checked* the miles are calculated as Unloaded. - Billable (to Customer) - Payable (to Driver) ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Trip Plan LWC Sp - 8.png) The first Leg (Start Type) is usually the dispatch location for a Truck to the first Stop location (End Type). 1. Select the Start Type location. 2. Enter the **Due Out Date** and **Time**. 3. Choose the End Type location. 1. If the Trip Plan Segment has a Load, the **End Type** is automatically entered as the first Load Stop location. 4. Set the **Appointment Date** and **Times**. 1. The **Appointment Date** and **Time** are automatically inserted from the selected Load. 5. Choose the appropriate functions from the list of buttons to configure the remaining components of the Leg. ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Trip Plan LWC Sp - 9.png) The buttons below perform the following actions and may be configured for each Trip Plan Leg. ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Trip Plan LWC Sp - 10.png) - The **Show Line Items** ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Show Line Items - 1.png) button displays the Load line item information associated with the Trip Plan Leg. > [!NOTE] > *Check* the **Show Line Item Button on Trip Plan Modal** field on TMS Admin → Configuration to enable this button. - The Leg *End Type* must be a Load Stop to choose the **Show Line Items** button and view the line items associated with the Trip Plan Leg. - When the End Type of Trip Plan Leg is a Pickup, the line items displayed are picked up at that Stop. - When the End Type of the Trip Plan Leg is a Delivery, the line items displayed are delivered to that Stop. - The following line item fields are displayed. - Item Number - Cargo Summary - Pickup Stop - Delivery Stop ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Trip Plan LWC Sp - 11.png) - The Add Trailer ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Add Trailer - 1.jpg) button displays the **Name** and **Seal Number** fields and the **Action** and **Cargo Status** picklists. - Search Fleet Assets by **Name** for a Chassis, Trailer, or Container to add it to the Trip Plan Leg. ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Trip Plan LWC Sp - 13.png) - The **Seal Number** field is managed by the Border Connect integration. - The **Seal Number** value automatically copies to each following Leg. - Select an **Action** (*Pickup*, *Hooked*, or *Dropoff*) for the Fleet Asset. - Choose a **Cargo Status** (*Empty*, *Loaded*, *Live Load*, *Live Unload*). - Choose the **Move Up** and **Move Down** buttons to order the position of equipment. - Update Legs below the modified Leg. - Click the Check ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Check - 1.jpg) button to complete the process of adding a Trailer. ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Trip Plan LWC Sp - 12.png) - Select the **Edit** (pencil) button to change Trailer or Cargo information. Click the Up or Down arrows to move the Trailer to a previous or later Leg. Choose **Remove** (x icon) to delete the Trailer. - Configure Trailers for each Trip Plan Leg as necessary. - **Save** the Trip Plan to copy Trailer information across all Trip Plan Legs. Modify the **Cargo Status** as necessary. - Trailers are set as *Hooked* and *Loaded* automatically for each Leg in the Trip Plan*.* - See more information for Equipment Management. - The Show Accessorials ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Show Accessorials - 1.png) button displays the Trip Plan Leg accessorial information. Add or remove Trip Plan Leg accessorial charges by entering the information in the displayed fields. - The Trip Plan Leg Accessorial charges allow for paying Drivers for accessorial charges associated with a Trip Plan Leg. See PayIQ documentation for more information. - The Find Equipment ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Find Equipment - 1.jpg) button opens the Fleet Equipment Management Lightning Web Component. - View all Equipment Types that match the search criteria within the search radius. ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Equipment Management View - 2(1).jpg) - Icons display on the map to show locations. - The green flag shows the location of the Origin. - The red flag shows the location of the Destination. - The orange dots are Equipment Pools located within the **Search Radius**. - Available Fleet Assets are listed when the Equipment Pools are within the **Search Radius**. - Choose the radio button for a specific Equipment Pool to filter Assets from only that Pool. - Search for the following **Equipment Types** (*Trailer*, *Chassis*, *Container*) and assign it to the Leg. - *Check* a Fleet Asset to view the mileage (*Loaded Miles*, *Deadhead Miles*, *Total Miles*, and *Deadhead Percentage*) for that Asset. - The *Deadhead Percentage* is the number of *Deadhead Miles* divided by the *Total Miles* multiplied by 100. - Click the **Add to Trip Plan** button to add the equipment to the Trip Plan. - Additional Legs are added to the Trip Plan automatically to pick up the equipment. - Click the Check ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Check - 1.jpg) button to finish updating the equipment. - Order the sequence of the Equipment hooked to the Power Unit/Tractor. - Assign a **Seal Number** to Trailer or Container. See the Border Connect documentation for more information. - The **Seal Number** value automatically copies to each following Leg. - Hook Equipment to a Power Unit/Tractor - See the Equipment Management documentation for more specific equipment information. - The Add Leg Above ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Add Leg Above - 1.jpg) button adds a Leg to the Segment above the selected Leg. - Enter all necessary Leg information. - The Add Leg Below ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Add Leg Below - 1.jpg) button adds a Leg to the Segment below the selected Leg. - Enter all necessary Leg information. - The Delete ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Remove Leg - 1.jpg) button removes the selected Leg from the Segment. > [!NOTE] > Add additional Trailers, Chassis, and Containers to a Leg as a Train. The order of Fleet Assets is saved in the Train Sequence field. #### Field Changes and Updates Trip Plans control and update the following Load fields. - Appointment Date - Appointment Time - Carrier - Load Status (except for the *Complete* status) Loads maintain control of the following fields. Changes to these fields trigger the Trip Plan **Status** field to update to *Load Changed* as described below. Manual updates to a Trip Plan are required. - Stop Order - Adding or removing Stop locations. - Customer changes to a Stop. The Trip Plan **Status** field is set to *Load Changed* and is highlighted in yellow when a Load is changed in the TMS. When the Trip Plan **Status** is *Load Changed* based on an updated Stop location, complete the following. 1. Open the Trip Plan. 2. Address any outstanding issues. 3. **Save** the Trip Plan when complete. 4. The Trip Plan **Status** field is automatically set to *Configured*. > [!WARNING] > Do not manually set the Trip Plan **Status** field to a value. As required Trip Planning steps are completed, the **Status** field updates automatically. Example: > > 1. A Trip Plan does not have a **Due Out Date**. > 2. The Status field is manually set to *Configured*. > 3. The Trip Plan **Status** field automatically reverts to *Pending*. Load Changes are processed by the Queued Transactions job. ### **Trip Plan List (Status-based)** From the Fleet Management Console, select the **Trip Plans** button. ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Trip Planning - 4.jpg) The Trip Plan List (Status-based) Lightning Web Component shows Trip Plans based on the Trip Plan **Status** and date combination. Select the Date and *Check* the **Status**(es) to view all Trip Plans that match the criteria. The Date field finds Trip Plans that match any day contained in a Trip Plan. ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Trip Plans - 1(3).jpg) Enter and view a Trip Plan by clicking the Trip Plans icon for that Trip Plan. ### **Trip Plan List (Record-based)** The Trip Plan List (Record-based) Lightning Web Component displays all Trip Plans for a particular Driver, Fleet Asset, or Load. ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Trip Plans - 2.jpg) From Fleet Management or Trip Planning views, select the Trip Plan icon for any Driver, Fleet Asset, or Load. The record-based Trip Plan List is only available for Drivers, Fleet Assets, or Loads that are managed by two or more Trip Plans. ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Trip Plan List - Records - 2.jpg) Click the Trip Plan icon to open the Trip Planner LWC. Choose **Close** to exit the LWC and return to the Fleet Management Console. ### **Trip Plan Template List** View available Trip Plan Templates with the Fleet Trip Plan Template List Lightning Web Component. Trip Plan templates allow for creating complex recurring trips. From the Fleet Management Console, select Trip Planning. Click the **Trip Plan Templates** button. ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Trip Planning - 5.jpg) Existing templates are displayed in a list view. Four actions may be completed from the list view. - Click the **Add** button. - The Trip Planner LWC opens and the **Is Template** field is *Checked*. - Provide a **Description** of the template. - Select the Trip Plan **Type** and add Segments and Legs as necessary. - When complete, choose **Save**. - The **Close** button exits the LWC and returns to the Fleet Management Console. - Choose the pencil icon to **Edit** an existing template. - Select the x icon to **Delete** an existing template. ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Trip Plans Template List - 1.jpg) **Create Templates** Create Trip Plan Templates from the Trip Plan Templates LWC. The steps below are necessary to create the template. Additional field information may be added and saved as part of the template. 1. Click the **Trip Plan Templates** button to open the Trip Plan Templates List LWC. 2. Select the **Add** button. 3. Choose a Trip Plan **Type**. 4. Enter a template **Description**. 5. The **Is Template** box is *Checked*. 6. Add all required Segments and Legs. 1. Templates must have at least 1 Segment with at least 2 Legs. 7. For each Leg **Start Type** and **End Type** select *Location*. 8. Click **Save** when finished. Trip Plan Templates may be created from existing Trip Plans. Enter a Trip Plan and *Check* the **Is Template** field. Configure the Segments and Legs and when complete, click **Save**. > [!WARNING] > Trip Plans and templates exist as distinct records. Saving an existing Trip Plan as a template removes Trip Plan functionality. A new Trip Plan may be generated from the newly saved template. **Apply Templates** Apply existing Trip Plan Templates to new Trip Plans. Complete the steps below to apply a template to a Trip Plan. 1. From Trip Planning, click the **Plan Trip** button to open the Fleet Trip Planner LWC. 2. Select the Load to move in the Load search on the Segment. 1. Loads may be added to the Trip Plan after the template is applied. 3. Click **Apply Template** and find the appropriate template from the Trip Plan Template List LWC. 1. To apply the template, Load Stop locations must match the template Stop locations. 2. Each Leg must have the same End Type location. 3. Only matching Legs are applied from the template. 4. Choose the pencil icon to apply the template to the Trip Plan. > [!NOTE] > Applying a template to a Trip Plan with a Load does not override Load fields like Appointment Dates and Times. ### **Trip Event Viewer** When a Load is added to a new Trip Plan, changes to the Load are tracked with the Fleet Trip Event Viewer Lightning Web Component. Click the bell icon on a Trip Plan to view the associated Trip Events. ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Trip Plan LWC Sp - 14.png) Trip Events may be manually created to record important information. Trip Events are also received automatically from integrations with Trimble Maps and either Samsara or Catena. > [!NOTE] > Unlike the Trip Events icon on Fleet Management Console views, the Trip Plan Trip Events icon does not change to the lightning icon when a Trip Event is marked **Is Alert**. **Accessorial Review** Enable the Accessorial Review feature from TMS Admin → Configuration → Fleet Management section. The Accessorial Review functionality generates Trip Events when accessorial charges are included on a Load or a Trip Plan Leg. - Load accessorial charges not accounted for on the Trip Plan Leg generate an Accessorial Review Trip Event. - If an accessorial charge is added to the Load or to the Trip Plan Leg, an Accessorial Review Trip Event is created. Trip Plan information automatically populates into the Trip Event viewer. ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Trip Event Viewer - 1.jpg) - Trip Events may be manually created with the **Add** button. - The **Trip Plan** record is automatically inserted into the field. - Enter the **Trip Plan Segment** first before selecting the **Trip Plan Leg**. - Select the **Event Type** from the picklist. - View existing Trip Events by selecting the radio button on the appropriate record. ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Trip Event Viewer - 2.jpg) The Fleet Chatter Lightning Web Component allows for communicating across an organization. Chatter feeds are stored on the records. ## **Status Flows Reference** | Action | Load Status | Fleet Load Status | Trip Plan Status | Trip Plan Segment Status | Driver Confirmation Status | | --- | --- | --- | --- | --- | --- | | Create Load | *Unassigned* | *Unplanned* | N/A | N/A | N/A | | **↓** | | | | | | | Create Trip Plan | *Unassigned* | *Partially Planned* | *Pending* | *Pending* | *Pending* | | **↓** | | | | | | | Due Out Date & Appointments Set | *Unassigned* | *Partially Planned* | *Pending* | *Pending* | *Pending* | | **↓** | | | | | | | Request Driver Confirmation by Email Loop | *Tendered* | *Partially Planned* | *Pending* | *Pending* | *Requested* | | Request Driver Confirmation manually | *Unassigned* | *Partially Planned* | *Pending* | *Pending* | *Requested* | | **↓** | | | | | | | Driver Accepts | *Assigned* | *Planned* | *Configured* | *Configured* | *Accepted* | | Driver Accepts, additional Segments not *Configured* | *Assigned* | *Partially Planned* | *Pending* | *Pending* | *Accepted* | | **↓** | | | | | | | Driver Declines | *Quotes Received* | *Partially Planned* | *Pending* | *Pending* | *Declined* | | **↓** | | | | | | | Segment Dispatched | *Dispatched* | *Dispatched* | *Dispatched* | *Dispatched* | *Accepted* | | Segment 1 Dispatched, additional Segments not Configured | *Dispatched* | *Partially Planned* | *Pending* | *Pending* | *Pending* | | **↓** | | | | | | | Undispatch | *Dispatched* | *Pending* | *Pending* | *Pending* | *Pending* | | Undispatch multiple Segments | *Dispatched* | *Pending* | *Pending* | *Pending* | *Pending* | | **↓** | | | | | | | Dispatched departed Shipper | *In Transit* | *Dispatched* | *Dispatched* | *Dispatched* | *Accepted* | | Dispatched departed Shipper multiple Segments | *In Transit* | *Partially Planned* until final Segment *Dispatched* | *Dispatched* | *Dispatched* | *Accepted* | | **↓** | | | | | | | Dispatched departed final Segment Stop | *In Transit* | *Dispatched* | *Dispatched* | *Pending Final* | *Accepted* | | **↓** | | | | | | | Departed final Trip Plan Stop | *Delivered* | *Pending Final* | *Pending Final* | *Pending Final or Completed* | *Accepted* | | **↓** | | **↓** Manual Step **↓** | | | | | Load Finaled | *Completed* | *Final* | *Completed* | *Completed* | *Accepted* | A feature in Salesforce that enhances the user experience by providing interactive and customizable components within Salesforce applications. Revenova uses Lightning Web Components to deliver features that can be tailored to suit your specific needs and preferences.