--- title: "Summer '25 Revenova TMS Installation Guide" slug: "summer-25-revenova-tms-installation-guide" tags: ["TMS Admin", "Admin"] updated: 2025-09-24T16:05:24Z published: 2025-11-04T19:05:19Z canonical: "documents.revenova.com/summer-25-revenova-tms-installation-guide" --- > ## Documentation Index > Fetch the complete documentation index at: https://documents.revenova.com/llms.txt > Use this file to discover all available pages before exploring further. # Summer '25 Revenova TMS Installation Guide ## Initial TMS Installation Use these instructions only if you are installing Revenova TMS for the first time. See the **Upgrading from a Previous Version** section to perform the upgrade of the previous release. 1. From **Setup → Lightning Email Templates**, toggle *Folders and Enhanced Sharing* to **On**. 2. Create a new Permission Set*.* 1. From **Setup → Permission Sets**, click the **New** button at the top of the Permission Sets list. 2. Label the new Permission Set as **Manage Public Lightning Email Templates and Drag-and-Drop Content Builder**. 3. Click **Save**. 4. Select the link for System Permissions and click the **Edit** button. 5. Search for these two permissions and add them to the Permission Set: - **Manage Public Lightning Email Templates** - **Access drag-and-drop content builder** 6. On the Permission Changes Confirmation modal, click **Save**. 7. Assign the **Manage Public Lightning Email Templates and Drag-and-Drop Content Builder** Permission Set to the logged-in user, completing the installation. 3. Obtain the URL and install the package, using the **Install for all Users** setting. 4. Wait a few minutes for the application to complete the installation process. You will receive an email upon completion of the installation. 5. From **Setup → Installed Packages**, click on the **Manage Licenses** link for the TMS package and assign licenses to users. 6. From **Setup → State and Country/Territory Picklists**, turn on **Country/State Picklists**. Start with the **United States** as the only country unless you have more information. 7. From **Setup → Data → Data Integration Rules**, activate **Geocodes for Account Shipping Address**. 8. From **Setup → Enhanced Email**, confirm that Enhanced Email is Enabled. 9. From **Setup → Flows**, set up and activate the packaged **TMS Auto-Reject Carrier Template** as a new flow or use an equivalent method to invalidate unacceptable carriers. 1. Click **TMS Auto-Reject Carrier Template**. 2. In the Flow Builder, select the **Save As New Flow** button. 3. Set the **Flow Label** as “TMS Auto-Reject Carrier” and **API Name** as “TMS_Auto_Reject_Carrier”. 4. Click **Save**, then **Activate**. 10. From **Setup → Duplicate Rules**, turn off **Matching Rules** and **Duplicate Rules** for Accounts and Contacts as they can prevent auto-creation of accounts in the application. 11. From **Setup** → **Session Settings**, *Check* the **Use Lightning Web Security for Lightning web components and Aura components** setting to ensure all components meet Salesforce security standards. If this feature is not enabled, all Lightning Web Components may encounter errors during use. Click **Save**. 12. From **Object Manager**, navigate to the following objects. For each object, click the **Edit** button. Under *Optional Features*, check the box for **Track Field History**. Click **Save**. - Carrier Quote - Carrier Quote Accessorial - Claim - Container - Customer Quote - Customer Quote Accessorial - Customer Quote Tax - Driver - EPayment - Fleet Asset - Line Item - Load - Load Accessorial - Load Reference - Sales Tax - Stop - Transportation Profile 13. Enable Feed Tracking for the following objects. This enables the Chatter feature across Fleet Management. (Only enable for Fleet Management) 1. From **Setup** → **Feed Tracking**, select the following objects. 2. *Check* **Enable Feed Tracking**. 3. Click **Save**. - Driver - Fleet Asset - Load - Trip Plan 14. From **TMS Admin → Configuration**, click on the **Reset Reference Data** button ONCE. Wait for this process to complete. 15. From **TMS Admin → Configuration**, fill out all the fields in the top section with valid values. 16. Create a global (broker) transportation profile as the global default and set it from **TMS Admin → Configuration**. 17. From **TMS Admin → Equipment Types**, set the four load board equipment types by visiting and filling out all information on each **Equipment Type** record. 18. From **Setup → Chatter Settings**, enable Chatter. 19. From **Setup → Trusted URLs**, add a new trusted URL for ALK Maps: ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Initial%20Install%201.png) 20. Make sure these custom **Account fields** are displayed for TMS users, properly secured. 1. TMS Type 2. Transportation Profile 3. DBA Name 4. Customer Sales Rep 5. Default Payment Method 6. Posting City 7. Posting State/Province 8. Time zone 21. Make sure the **Transportation Role** field is displayed for TMS users on the Contact page layout. 22. Provide appropriate CRUD access to each user profile for each TMS object. 23. Customize page layouts and Lightning Record Pages as appropriate for each profile. 24. Salesforce requires that user email addresses are verified to enhance accountability and security when sending emails. When an org is updated to the Salesforce Spring ’25 release, a reminder email is no longer sent. If encountering issues with users ability to send email messages, confirm the email address is verified. The Getting Started with Revenova article contains steps to confirm an email address is verified. See additional Salesforce information [here](https://help.salesforce.com/s/articleView?id=002183046&type=1). 25. Please refer to the Getting Started with Revenova article and the Revenova Document Base for detailed descriptions, configuration settings, and customizations available in the application. ## Upgrading from a Previous Version You must perform each set of upgrade tasks (EXCEPT for the package installation step which can skip from any release to the latest) if you are upgrading from a release prior to the previous release. Follow the upgrade steps from the **oldest release to the newest release**, in order, for any upgrades that span multiple releases. ### Release Summer ’25 TMS Upgrade Instructions (ETC: 45 minutes) > [!WARNING] > **Note**: The Summer ’25 release includes significant enhancements to the Fleet Management Console and Catena integrations. > > - All existing Fleet Management Console views are removed. Take note of the columns used in existing views to assist in creating new views. > - Customers using the Catena integration require additional setup. Do not install the TMS Summer ’25 package without consulting with a Revenova representative. > > See information for creating new views here and Catena information here. **Accounting Package Compatibility** Prior to TMS package installation, confirm there is a compatible accounting package version for the options below. - Sage API (Sage 300) - Sage Flat File - Dynamics GP Contact Professional Services with any questions. Accounting Seed customers must have **BOTH** the **TMS** and **Accounting Seed Bridge** packages before upgrading. Complete the TMS Upgrade installation before installing the Accounting Seed Bridge package. See the [Accounting Seed Bridge](/v1/docs/accounting-seed-installation-guide) installation instructions for more information. **Items in** **blue** **are optional and may be skipped if the feature is not used. Structural changes in** **red** **are required.** 1. **Install and test in a sandbox** **environment** before upgrading to the production environment. 2. You must have installed and completely configured the **Spring ’25 Release** before installing this release. 3. Salesforce requires that user email addresses are verified to enhance accountability and security when sending emails. When an org is updated to the **Salesforce Spring ’25 release**, a reminder email is no longer sent. If encountering issues with users ability to send email messages, confirm the email address is verified. The Getting Started with Revenova article contains steps to confirm an email address is verified. See additional Salesforce information [here](https://help.salesforce.com/s/articleView?id=002183046&type=1). 4. **SFDC/TMS Pre-Configuration** 1. For Accounting Seed customers, do not install this TMS release until you have the Accounting Seed Bridge package URL also. They must be upgraded at the same time. 2. From **Setup → Duplicate Rules**. Turn off **Matching Rules** and **Duplicate Rules** for Accounts and Contacts as they can prevent auto-creation of accounts in the application. 3. From **Setup** **→** **Data** **→** **Data Integration Rules** activate **Geocodes for Account Shipping Address**. 4. From **Setup → State and Country/Territory Picklists** turn on **Country/State Picklists.** Start with the **United States** as the only country unless you have more information. These picklists should be enabled unless there is a backward-compatibility issue with other packages or customizations. 5. From **Setup** → **Session Settings**. *Check* the **Use Lightning Web Security for Lightning web components and Aura components** setting to ensure all components meet Salesforce security standards. Click **Save**. > [!WARNING] > **Note**: Thoroughly test any custom Lightning Web Components when enabling this setting. All TMS components are tested to support this functionality. 6. From the **Object Manager**, make sure no values were added to the Load object’s **Sales Status** or **Load Status** picklist fields or the Stop object’s **Stop Status** picklist field. 5. Confirm that a Driver Status Picklist Value Set includes a specific value before upgrading. 1. From **Setup**, search for and select **Picklist Value Sets**. 2. Choose the *Driver Status* **Picklist Value Set**. 3. Confirm the *No Status* value is present in the **Values** section. If not, add the value by following the steps below. 1. In the **Values** section, click the **New** button. 2. Enter *No Status* in the box. 3. *Check* the **Add the new picklist value to all Record Types that use this Global Value Set** box. 4. Click **Save**. 5. The **API Name** for the value must be *No Status*. If necessary, change the **API Name** value by choosing the *Edit* link and changing the value. Click **Save**. > [!WARNING] > Note the values stored in **TMS Admin → Configuration** for the following fields. Later in this installation, confirm these fields were correctly copied into the appropriate fields. > > - TMS Admin → Configuration, **Carrier Status Reply To Email**. > - TMS Admin → Configuration, **Carrier Status Reply To User**. 1. Obtain the **Summer ’25 installation URL and password** from your Revenova representative. 2. Install the upgrade. 1. Select *Install for All Users*. 2. Click **Upgrade**. 3. If prompted, *Check* the *Yes, grant access to these third-party web sites* box. 4. Click **Continue**. 5. In Setup, find *Deployment Status* and click the link to view the progress of the installation. 6. Wait for the *Installation succeeded* email. > [!NOTE] > **Upgrade Note**: Several new objects and fields are included in the TMS Summer ’25 release. Set CRUD access for the objects and/or fields accordingly. > [!CAUTION] > Warning > > Upgrade installations do not add any objects or fields to custom permission sets. Add new fields as necessary to any custom permission sets. New fields are added automatically to Revenova packaged permission sets and do not require additional setup. > > Custom permission sets are commonly used for the following: > > - Carrier Community > - Carrier Email Loop Customer Community > - Customer Email Loop > - Fleet Email Loop 1. From **TMS Admin →** **Configuration,** click on the **Reset Reference Data** button **ONCE** and wait for the email indicating completion. This process completes the following tasks. > [!WARNING] > Confirm that the **Session Security Level Required at Login** field is set to *None* on the Profile for the user completing the Reset Reference Data step. If the value is set to *High Assurance*, the Reset Reference Data does not complete all tasks. > > After completing the Reset Reference Data step, return the **Session Security Level Required at Login** field to the original value. > > ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Installation Guide - 5.png) 1. Adds two new AI Models to the available list in the Artimus™ AI Console. 1. gpt-4.1 2. gpt-4.1-mini 2. Adds the default values for each of the Document Options fields below. 1. **Carrier Quote Tender Landing Message**: Indicate your acceptance of this load by clicking on the Accept button. Or if you are unable to accommodate this shipment, please click on the Decline button. 2. **Carrier RFQ Load Board Instructions**: Thank you for accepting the previous load! To keep you loaded, below is our internal load board where you can bid on freight that we've exposed especially for you. The default pickup location is set based on the delivery location of the load you just accepted, but you can use the filters to narrow your search further. Feel free to bid on any loads you’re interested in covering. Thank you! 3. **Customer Quote Landing Page Message**: Indicate your acceptance of this load quotation by clicking Accept. If you do not accept the load quotation, click Decline. 3. The following fields are populated with values from obsolete fields. Obsolete fields are deleted later as part of this installation. (object, **old field** → object, **new field(s)**) 1. Document Options, **Quote Reply To Email** → Document Options, **Carrier Quotation Request Reply To Email** AND **Customer Load Confirm Reply To Email**. 2. Document Options, **Tender Reply To Email** → Document Options, **Carrier Load Tender Reply To Email** AND **Driver Load Confirm Reply To Email**. 3. TMS Configuration → **Carrier Status Reply To Email** → Document Options, **Carrier Load Status Reply To Email**. 4. TMS Configuration, **Carrier Status Reply To User** → Document Options, **Carrier Load Status Reply To User**. 5. Populates the following new fields for existing Carrier Quote and Rate Entry records. Carrier Quote record updates are limited to “active” Carrier Quotes/Loads. These Carrier Quote records must have a value in the **Quote/Contract Id** field AND the **Accepted** field is *Checked* OR the Load **Status** is not one of the following values: *Delivered*, *Completed*, *Cancelled*, *Declined*, or *Expired*. Historic Carrier Quote records have the Carrier Quote Reference field populated with the value from the **Quote/Contract Id** field even if the **Quote/Contract Id** value is from a Rate Entry. (old field → new field) 1. Populates the Carrier Quote **Carrier Quote Reference** field. (**Quote/Contract Id** → **Carrier Quote Reference**) 2. Rate Entry records that have a value in the **Quote/Contract Id** field populate the Rate Entry **Contract Id** field. (**Quote/Contract Id** → **Contract Id**) 4. Adds the following picklist values. (Object → **Field** → *Picklist Value*) 1. Carrier Markup → **Markup Type** → *Freight+Fuel* 2. Carrier Markup → **Markup Type** → *Freight+Fuel+Accessorial* 3. Transportation Profile *→* **Mileage API Routing** *→ Fastest* 5. Sets the **Use Rest API** field to *Checked* on the PC Miler credential card. > [!WARNING] > **Note**: Any errors encountered while running the Release Update Job are sent to the email account for the User running the job. Errors can also be found in the Apex Jobs view. 2. The Organization-Wide Email feature requires additional configuration. Follow the linked documentation to create Organization-Wide Email Addresses as necessary. 1. Navigate to **TMS Admin → Document Options**. Update the **Reply To Email**, **Reply To User**, and **Reply To OWEA** fields as desired for the fields below. 1. The old **Quote Reply to Email** field is replaced with **Customer Load Confirm** or **Carrier Quotation Request** fields. 2. The old **Tender Reply to Email** field is replaced with the **Carrier Load Tender** fields. 3. Catena integration users require changes to the org to continue using the integration. A Revenova representative completes the following steps. 1. The Catena credentials card **Username** and **Password** fields are updated. 2. Named Credentials are entered for the Catena integration. 1. Navigate to **Setup → Named Credentials**. 2. Select the *External Credentials* tab. 3. 2 Named Credentials for Catena exist. 1. Catena 2. Catena_Test 4. Click the **Catena_Test** link. 1. In the *Principals* section, find the *Admin* **Parameter Name**. Under the *Actions* column, choose the drop-down and click **Edit**. 2. Enter the credentials provided by Revenova. 3. Click **Save**. 3. Add support for the appropriate Profiles and/or Permission Sets as necessary. 1. For Profiles, navigate to **Setup → Profiles**. 1. Select the appropriate Profile(s). 2. Find the *Enabled External Credential Principal Access* section. 3. Click **Edit**. 1. Add *Catena - Admin* to the **Enabled External Credential Principals** section in production orgs. 1. Add *Catena_Test - Admin* to the **Enabled External Credential Principals** section in sandbox orgs. 2. Click **Save**. 2. For Permission sets, navigate to **Setup → Permission Sets**. 1. Select the appropriate Permission Set(s). 2. Choose the *External Credential Principal Access* link. 3. Click **Edit**. 1. Add *Catena - Admin* to the **Enabled External Credential Principal Access** section in production orgs. 1. Add *Catena_Test - Admin* to the **Enabled External Credential Principal Access** section in sandbox orgs. 2. Click **Save**. > [!NOTE] > Provide External Credential Principal Access permission to any profile or permission set for any user that runs the Fleet Manager Job 2 or sends messages to Drivers. 1. Complete this step AFTER the Reset Reference Data job finishes running and the confirmation email is received. Remove the following obsolete fields that were deleted from the TMS. 1. Navigate to **Setup** and search for and select *Lightning Components*. > [!WARNING] > **Note**: Complete Steps 10b to 10g in the **Subscriber** org. 1. Find the **fleetManagementConsoleFilter** Lightning Component. 2. Click the *Del* link to remove the component. 3. Find the **fleetEquipmentManagement** Lightning Component. 4. Click the *Del* link to remove the component. 2. Navigate to **Setup** and search for and select *Custom Settings*. > [!NOTE] > **Salesforce Note**: Complete Steps 10c to 10f in **Salesforce Classic**. 1. Select the *TMS Configuration* option. 1. Find the **Carrier Status Reply To Email** field. 2. Click the *Del* link to remove the field. 3. Find the **Carrier Status Reply To User** field. 4. Click the *Del* link to remove the field. 5. Find the **Fleet Management 2 Enabled** field. 6. Click the *Del* link to remove the field. 7. Find the **Fleet Management Job 2 Last Run** field. 8. Click the *Del* link to remove the field. 9. Find the **Load Tracking Duration** field. 10. Click the *Del* link to remove the field. 11. Find the **Load Tracking Update Interval** field. 12. Click the *Del* link to remove the field. 3. Navigate to **Setup** and search for and select *Objects*. 1. Choose the *Carrier Quote* object. 2. Click the *Del* link for the **Quote/Contract Id** field. 4. Navigate to **Setup** and search for and select *Objects*. 1. Choose the *Document Options* object. 2. Click the *Del* link for the **Quote Reply To Email** field. 3. Click the *Del* link for the **Quote Reply To Email Option** field. 4. Click the *Del* link for the **Tender Reply To Email** field. 5. Click the *Del* link for the **Tender Reply To Email Option** field. 5. Navigate to **Setup** and search for and select *Objects*. 1. Choose the *Rate Entry* object. 2. Click the *Del* link for the **Quote/Contract Id** field. 6. Navigate to **Setup** and search for and select *Objects*. 1. Click the *Del* link for the **Fleet Management Console View** object. 7. Return to the Salesforce Lightning Experience. > [!WARNING] > Confirm the appropriate field values copied correctly into the new Document Options fields. Only one value copies over during the Reset Reference Data Job (Step 7). > > - **Carrier Status Reply To Email** field value into → Document Options, **Carrier Load Status Reply To Email**. > - **Carrier Status Reply To User** field value into → Document Options, **Carrier Load Status Reply To User**. 1. The CarrierTrackingStatus Visualforce Page is removed as part of the Summer ‘25 installation. Any Carrier, Customer, or Driver Portals that use the CarrierTrackingStatus Visualforce page need to replace that page with the stopStatus component to continue allowing users to log in and update Stop statuses. Consult with Revenova to replace the CarrierTrackingStatus Page with the new stopStatus component. 2. The Fleet Management Console is enhanced to create highly customizable Fleet Management views. New Fleet Management views must be created based on customer preference. See additional information on creating new views. 1. See the Optional Fleet Management Setup section below for additional Fleet Management Job 3 setup. 3. Salesforce is no longer supporting Workflow Rules and Process Builder. Revenova provides a new Auto-Reject Carrier Flow template to replace this retiring Workflow Rule. 1. Deactivate the existing Workflow Rule. *Any additional rules or criteria added to the original Revenova-packaged Workflow Rule should be evaluated and added to the Flow enabled in Step b below, as desired.* 1. Navigate to **Setup → Workflow Rules**. 2. Find the *TMS Auto-Reject Carrier* Workflow Rule. 3. Click the **Deactivate** link. 2. Activate the new Flow. 1. From **Setup → Flows**. Set up and activate the packaged **TMS Auto-Reject Carrier Template** as a new flow or use an equivalent method to invalidate unacceptable carriers. 1. Click **TMS Auto-Reject Carrier Template**. 2. In the Flow Builder, select the **Save As New Flow** button. 3. Set the **Flow Label** as “TMS Auto-Reject Carrier” and **API Name** as “TMS_Auto_Reject_Carrier”. 4. Click **Save**, then **Activate**. 4. The following triggers are optimized for the Summer ’25 release. Thoroughly test that any custom code based on these triggers is working properly when performing the upgrade. 1. AccountUpsertDelete 2. CarrierInvoiceAccessorialUpsertDelete 3. CarrierInvoiceAdjustment 4. CarrierInvoiceUpsert 5. CarrierMarkup 6. CarrierMarkupGroup 7. CarrierQuoteAccessorialUpsertDelete 8. CarrierServiceUpsert 9. CustomerInvoiceAccessorialUpsertDelete 10. CustomerInvoiceAdjustment 5. The PC Miler integration adds Load Map features. All PC Miler integration users should complete the following steps. 1. Navigate to **Setup → Object Manager**. 1. Find the **User** object. 2. Select the *User Page Layouts* link. 3. Choose the desired *User Page Layout*. 4. In the User Layout section, drag the **Show Route Options** field onto the User page layout. 5. Click **Save**. 6. *Check* the **Show Route Options** field on each User record to enable the Load Map control panel. 2. Navigate to a Customer Transportation Profile. 1. Choose **Setup → Edit Page**. 2. Select the appropriate Lightning Record Page. 3. Drag the following fields onto the LRP. Fields are located in the *Customer Mileage & Routing* section on the Revenova default LRP. 1. **Mileage API Borders** 2. **Mileage API Highway Only** 3. **Mileage API Override Restrictions** 4. **Mileage API Toll Roads** ### Optional Brokerage Setup Freight Brokerage orgs should complete the following optional steps as requested. 1. Add the RateIQ component to the Utility Bar, Home Page, or Load Page as requested. Follow the link for instructions on adding the RateIQ component to the utility bar. 1. Navigate to the requested (Home and/or Load) Lightning Record Page. 2. Choose **Setup → Edit Page**. 3. Drag the RateIQ component onto the page. 4. Click **Save**. 2. Orgs using EDI transactions should check email settings. EDI transaction failure email messages now contain the transaction XML for easier troubleshooting. 3. Enhancements to the productized version of the Highway integration correctly maps to packaged picklist values. Any customer orgs that added custom picklist values should remove the custom picklist values from the Transportation Profile **Other Carrier Capabilities** field. 1. Navigate to **Setup → Object Manager** and select the *Transportation Profile* object. 2. Select the **Fields & Relationships** tab. Choose the **Other Carrier Capabilities** field. 3. Click **Del** for the *CARB-TRU Compliant* custom picklist value. 1. The custom picklist value has an API Name that is NOT *CARB-TRU Compliant (California)*. 2. On the *Replace value on records with* screen, select *CARB-TRU Compliant (California)*. This is the packaged value. ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Installation Guide - 1.jpg) 3. Click **Save**. 4. Click **Del** for the *CARB-Truck Compliant* custom picklist value. 1. The custom picklist value has an API Name that is NOT *CARB-Truck Compliant (California)*. 2. On the *Replace value on records with* screen, select *CARB-Truck Compliant (California)*. This is the packaged value. ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Installation Guide - 2.jpg) 3. Click **Save**. 4. The precision of the **Distance Override** field for *Per Mile*/*Per Kilometer* **Rate Method** Rate Entries is increased to 3 decimal figures. Update Rate Entry records for these **Rate Method** types if necessary. 1. Navigate to **TMS Admin → Rate Entries**. 2. Find the appropriate Rate Entry records. 3. From the Base Rate Calculation section, add additional precision to the **Distance Override** field. 5. Customer orgs using a Carrier or Customer Email Loop community may skip the Email Loop architecture changes to control bots Accepting or Declining Quotes and Tenders. 1. If requested, navigate to TMS Admin → Document Options. *Check* the following fields to bypass this feature. 1. **One-Click Carrier Quote Tender Response** 2. **One-Click Customer Quote Response** 2. Configure the text that users see when using Email Loop communities. 1. Navigate to **TMS Admin → Document Options**. 2. In the *Community Configuration* section, find the following fields and enter text as needed. 1. **Carrier Quote Tender Landing Message** 2. **Customer Quote Landing Page Message** 3. **Carrier RFQ Load Board Instructions** 6. Carrier Markups support additional **Markup Type** values. 1. Navigate to **TMS Admin → Carrier Markup Groups**. 2. Select the appropriate existing Carrier Markup Group records or create new records. 3. Choose the Carrier Markups related list. 4. Add Carrier Markup records with the *Freight+Fuel* and/or *Freight+Fuel+Accessorial* Markup Type, as desired. ### Optional Fleet Management Setup Fleet Management orgs should complete the following optional steps as requested. 1. Existing Fleet Management customers using the integration with Samsara should switch from the obsolete Fleet Management Job to the faster and more efficient Fleet Management Job 3. 1. Navigate to TMS Admin → Configuration and find the Fleet Management section. Set the following field values. 1. *Check* the **Fleet Management Enabled** field. 2. Set the **Fleet Management Job** field to *Fleet Management Job 3*. 2. Assign all available platform cache to tms. 1. From **Setup**, search for and select *Platform Cache*. 2. Click the *Edit* link for the **rtms** record. ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Installation Guide - 3.jpg) 3. In the *Org Cache Allocation* section find the **Organization** field. 4. Enter *3*. If necessary, enter *0* in **Provider Free**. ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Installation Guide - 4.jpg) 5. Click **Save**. 3. Confirm all available platform cache is assigned to *tms*. The image below shows an org with all available platform cache assigned to *tms*. ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Setup - Platform Cache - 1(1).jpg) 4. The existing Fleet Management Job is still supported and may be used for troubleshooting purposes. 2. The [Catena](/v1/docs/catena-eld-aggregator#other-setup-information) integration uses a new packaged Driver Lightning Record Page. Assign the Driver Lightning Page Layout by completing the following steps. 1. Navigate to **Setup → Object Manager**. 1. Choose the *Driver* object. 2. Select the *Lightning Record Pages* link. 3. Choose the *Driver - Revenova Default (Catena)* page. 4. Click the **View** button. 5. Choose the **Activation…** button. 6. Click the **Assign as Org Default** button. 7. Select **Desktop and phone**. 8. Choose **Next**. 9. From the Review assignment modal, click **Save**. Confirm all required TMS batch jobs are running and/or scheduled. See the Batch Processes article for suggested run times. ### Release Summer ’25 Field/Field Set Modification Summary – TMS > [!NOTE] > **Field Set Note**: Review fields added by the installation and set CRUD access as needed. | **Object** | **Field/Field Set** | **Action** | **Notes** | | --- | --- | --- | --- | | Carrier Markup | Markup Type | Modify | Added “Freight+Fuel” and “Freight+Fuel+Accessorial” picklist values. | | Carrier Quote | Carrier Quote Reference | Add | Support for API Quote ID fields. | | Carrier Quote | Contract Id | Add | Support for API Quote ID fields. | | Carrier Quote | Quote/Contract Id | Delete | Removed obsolete field. | | Complex Datatable View | | Add | Support for Fleet Management views. | | Complex Datatable View | Default For | Add | Support for Fleet Management views. | | Complex Datatable View | Is Inner View | Add | Support for Fleet Management views. | | Complex Datatable View | Parent View | Add | Support for Fleet Management views. | | Complex Datatable View | Persistent State | Add | Support for Fleet Management views. | | Complex Datatable View | Shared With | Add | Support for Fleet Management views. | | Complex Datatable View | View Name | Add | Support for Fleet Management views. | | Complex Datatable View | View Type | Add | Support for Fleet Management views. | | Document Options | Carrier Application Reply To Email | Add | Support for Org Wide Email Address architecture. | | Document Options | Carrier Application Reply To OWEA | Add | Support for Org Wide Email Address architecture. | | Document Options | Carrier Load Status Reply To Email | Add | Support for Org Wide Email Address architecture. | | Document Options | Carrier Load Status Reply To OWEA | Add | Support for Org Wide Email Address architecture. | | Document Options | Carrier Load Status Reply To User | Add | Support for Org Wide Email Address architecture. | | Document Options | Carrier Load Tender Reply To Email | Add | Support for Org Wide Email Address architecture. | | Document Options | Carrier Load Tender Reply To OWEA | Add | Support for Org Wide Email Address architecture. | | Document Options | Carrier Load Tender Reply To User | Add | Support for Org Wide Email Address architecture. | | Document Options | Carrier Quotation Request Reply To Email | Add | Support for Org Wide Email Address architecture. | | Document Options | Carrier Quotation Request Reply To OWEA | Add | Support for Org Wide Email Address architecture. | | Document Options | Carrier Quotation Request Reply To User | Add | Support for Org Wide Email Address architecture. | | Document Options | Carrier Quote Tender Landing Message | Add | Support for new Email Loop architecture. | | Document Options | Carrier RFQ Load Board Instructions | Add | Support for new Email Loop architecture. | | Document Options | Customer Invoice Batch Reply To Email | Add | Support for Org Wide Email Address architecture. | | Document Options | Customer Invoice Batch Reply To OWEA | Add | Support for Org Wide Email Address architecture. | | Document Options | Customer Invoice Reply To User | Add | Support for Org Wide Email Address architecture. | | Document Options | Customer Invoice Reply To Email | Add | Support for Org Wide Email Address architecture. | | Document Options | Customer Invoice Reply To OWEA | Add | Support for Org Wide Email Address architecture. | | Document Options | Customer Invoice Reply To User | Add | Support for Org Wide Email Address architecture. | | Document Options | Customer Load Confirm Reply To Email | Add | Support for Org Wide Email Address architecture. | | Document Options | Customer Load Confirm Reply To OWEA | Add | Support for Org Wide Email Address architecture. | | Document Options | Customer Load Confirm Reply To User | Add | Support for Org Wide Email Address architecture. | | Document Options | Customer Quote Landing Page Message | Add | Support for new Email Loop architecture. | | Document Options | Driver Load Confirm Reply To Email | Add | Support for Org Wide Email Address architecture. | | Document Options | Driver Load Confirm Reply To OWEA | Add | Support for Org Wide Email Address architecture. | | Document Options | Driver Load Confirm Reply To User | Add | Support for Org Wide Email Address architecture. | | Document Options | Fleet Driver Confirm Reply To Email | Add | Support for Org Wide Email Address architecture. | | Document Options | Fleet Driver Confirm Reply To OWEA | Add | Support for Org Wide Email Address architecture. | | Document Options | Fleet Driver Confirm Reply To User | Add | Support for Org Wide Email Address architecture. | | Document Options | One Click Carrier Quote Tender Response | Add | Support for new Email Loop architecture. | | Document Options | One Click Customer Quote Response | Add | Support for new Email Loop architecture. | | Document Options | Quote Reply To Email | Delete | Removed obsolete field. | | Document Options | Quote Reply To Email Option | Delete | Removed obsolete field. | | Document Options | Remove Carrier Reply To Email | Add | Support for Org Wide Email Address architecture. | | Document Options | Remove Carrier Reply To OWEA | Add | Support for Org Wide Email Address architecture. | | Document Options | Remove Carrier Reply To User | Add | Support for Org Wide Email Address architecture. | | Document Options | Tender Reply To Email | Delete | Removed obsolete field. | | Document Options | Tender Reply To Email Option | Delete | Removed obsolete field. | | Fleet Asset | Asset Ownership | Add | Support for Fleet Management views. | | Fleet Asset | Asset Ownership Type | Add | Support for Fleet Management views. | | Fleet Management Console View | | Delete | Removed old Fleet Console views. | | Fleet Management Console View | Appointment End Lead Time (Days) | Delete | Removed old Fleet Console views. | | Fleet Management Console View | Appointment Start Lead Time (Days) | Delete | Removed old Fleet Console views. | | Fleet Management Console View | Appointment Status | Delete | Removed old Fleet Console views. | | Fleet Management Console View | Company/Division | Delete | Removed old Fleet Console views. | | Fleet Management Console View | Company/Division Name | Delete | Removed old Fleet Console views. | | Fleet Management Console View | Customer | Delete | Removed old Fleet Console views. | | Fleet Management Console View | Default For | Delete | Removed old Fleet Console views. | | Fleet Management Console View | Display Columns | Delete | Removed old Fleet Console views. | | Fleet Management Console View | Display Columns 2 | Delete | Removed old Fleet Console views. | | Fleet Management Console View | Domicile | Delete | Removed old Fleet Console views. | | Fleet Management Console View | Domicile Name | Delete | Removed old Fleet Console views. | | Fleet Management Console View | Driver Status | Delete | Removed old Fleet Console views. | | Fleet Management Console View | Equipment Pool Type | Delete | Removed old Fleet Console views. | | Fleet Management Console View | Equipment Status | Delete | Removed old Fleet Console views. | | Fleet Management Console View | Equipment Type | Delete | Removed old Fleet Console views. | | Fleet Management Console View | First Stop | Delete | Removed old Fleet Console views. | | Fleet Management Console View | Fleet Asset Status | Delete | Removed old Fleet Console views. | | Fleet Management Console View | Fleet Asset Type | Delete | Removed old Fleet Console views. | | Fleet Management Console View | Fleet Load Status | Delete | Removed old Fleet Console views. | | Fleet Management Console View | Inbound/Outbound | Delete | Removed old Fleet Console views. | | Fleet Management Console View | Locations | Delete | Removed old Fleet Console views. | | Fleet Management Console View | Manager | Delete | Removed old Fleet Console views. | | Fleet Management Console View | Order By | Delete | Removed old Fleet Console views. | | Fleet Management Console View | Order By Direction | Delete | Removed old Fleet Console views. | | Fleet Management Console View | Owner Name | Delete | Removed old Fleet Console views. | | Fleet Management Console View | Shared With | Delete | Removed old Fleet Console views. | | Fleet Management Console View | Team Status | Delete | Removed old Fleet Console views. | | Fleet Management Console View | Trip Plan Default View | Delete | Removed old Fleet Console views. | | Fleet Management Console View | View Name | Delete | Removed old Fleet Console views. | | Fleet Management Console View | View Type | Delete | Removed old Fleet Console views. | | Fleet Management Console View | Visible Rows | Delete | Removed old Fleet Console views. | | Fleet Management Console View | Zone | Delete | Removed old Fleet Console views. | | Line Item | TMS9 Field Set | Add | Support for Line Items in the Fleet Management Console. | | Load | Equipment Routing Restrictions | Add | Support for Load Map features. | | Load | Hazmat Routing | Add | Support for Load Map features. | | Load | Mileage API Highway Only | Add | Support for Load Map features. | | Load | Mileage API Override Restrictions | Add | Support for Load Map features. | | Load | Mileage API Routing | Add | Support for Load Map features. Add *Fastest* picklist value. | | Load | Mileage API Toll Roads | Add | Support for Load Map features. | | Load | TMS39 Field Set | Add | Support for Loads in the Fleet Management Console. | | Persistent Page | | Add | Support for Fleet Management views. | | Persistent Page | Category | Add | Support for Fleet Management views. | | Persistent Page | Order | Add | Support for Fleet Management views. | | Persistent Page | Name | Add | Support for Fleet Management views. | | Persistent Page Complex Datatable | | Add | Support for Fleet Management views. | | Persistent Page Complex Datatable | Complex Datatable View | Add | Support for Fleet Management views. | | Persistent Page Complex Datatable | Name | Add | Support for Fleet Management views. | | Persistent Page Complex Datatable | Order | Add | Support for Fleet Management views. | | Persistent Page Complex Datatable | Persistent Page | Add | Support for Fleet Management views. | | Rate Entry | Contract Id | Add | Support for API Quote ID fields. | | Rate Entry | Quote/Contract Id | Delete | Replaced by Contract Id field. | | Stop | TMS13 Field Set | Add | Support for Stops in the Fleet Management Console. | | Transportation Profile | Mileage API Borders | Add | Support for Load Map features. | | Transportation Profile | Mileage API Highway Only | Add | Support for Load Map features. | | Transportation Profile | Milage API Override Restrictions | Add | Support for Load Map features. | | Transportation Profile | Mileage API Routing | Modify | Support for Load Map features. Add *Fastest* picklist value. | | Transportation Profile | Mileage API Toll Roads | Add | Support for Load Map features. | | User | Show Route Options | Add | Support for Load Map features. |