--- title: "Revenova TMS 7.11 Installation Guide" slug: "revenova-tms-711-installation-guide" tags: ["7.11", "Admin"] updated: 2026-07-02T19:18:37Z published: 2026-07-02T19:18:37Z canonical: "documents.revenova.com/revenova-tms-711-installation-guide" --- > ## Documentation Index > Fetch the complete documentation index at: https://documents.revenova.com/llms.txt > Use this file to discover all available pages before exploring further. # Revenova TMS 7.11 Installation Guide ## **Overview** ## Initial TMS Installation 1. Use these instructions only if you are a first-time installer of Revenova TMS. Go to the **Upgrading from a Previous Version** section to perform an upgrade of a previous release. 2. From **Setup → Lightning Email Templates** toggle *Folders and Enhanced Sharing* to **On**. 1. Create a new *Permission Set.* 1. From **Setup → Permission Sets**. 2. Click the **New** button at the top of the Permission Sets list. 3. Label the new Permission Set, "*Manage Public Lightning Email Templates and Drag-and-Drop Content Builder*." 4. Click **Save**. 5. Click the link for System Permissions and click the **Edit** button. Search for these two permissions and add them to the Permission Set: 1. Manage Public Lightning Email Templates. 2. Access drag-and-drop content builder. 6. On the Permission Changes Confirmation modal, click **Save**. 2. Assign the *Manage Public Lightning Email Templates and Drag-and-Drop Content Builder* Permission Set to the logged in user completing the installation. 3. Obtain the URL and install the package, using the **Install for all Users** setting. 4. Wait a few minutes for the application to complete the installation process. You will receive an email upon completion of the installation. 5. From **Setup → Installed Packages** click on the **Manage Licenses** link for the TMS package and assign licenses to users. 6. From **Setup → State and Country/Territory Picklists** turn on **Country/State Picklists**. Start with the **United States** as the only country unless you have more information. 7. From **Setup → Data Management → Data Integration Rules** activate **Geocodes for Account Shipping Address**. 8. From **Setup → Enhanced Email**. Confirm that Enhanced Email is Enabled. 9. From **Setup → Workflow Rules**. Make sure the **TMS Auto-Reject Carrier** Transportation Profile workflow rule is active or an equivalent method to invalidate unacceptable carriers. 10. From **Setup → Duplicate Rules**. Turn off **Matching Rules** and **Duplicate Rules** for Accounts and Contacts as they can prevent auto-creation of accounts in the application. 11. From **Object Manager**, navigate to the following objects. For each, click the **Edit** button. Under *Optional Features*, check the box for **Track Field History**. Click **Save**. 1. Carrier Quote 2. Carrier Quote Accessorial 3. Claim 4. Container 5. Customer Quote 6. Customer Quote Accessorial 7. Customer Quote Tax 8. EPayment 9. Line Item 10. Load 11. Load Accessorial 12. Load Reference 13. Stop 14. Transportation Profile 12. From **TMS Admin → Configuration** click on the **Reset Reference Data** button ONCE. Wait for this process to complete. 13. From **TMS Admin → Configuration** fill out all the fields in the top section with valid values. 14. Create a global (broker) transportation profile as the global default and set it from **TMS Admin → Configuration**. 15. From **TMS Admin → Equipment Types** set the four load board equipment types by visiting and filling out all information on each **Equipment Type** record. 16. From **Setup → Chatter Settings** enable Chatter. 17. From **Setup → CSP Trusted Sites** add an entry for ALK Maps: ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Initial%20Install%201.png) 18. Make sure these custom **Account fields** are displayed for TMS users, properly secured: 1. TMS Type 2. Transportation Profile 3. DBA Name 4. Customer Sales Rep 5. Default Payment Method 6. Posting City 7. Posting State/Province 8. Time zone 19. Make sure the **Transportation Role** field is displayed for TMS users on the Contact page layout. 20. Provide appropriate CRUD access to each user profile for each TMS object. 21. Tailor page layouts and lightning record pages as appropriate for each profile. 22. Please refer to the Revenova Knowledge Base for detailed descriptions, configuration settings, and customizations available in the application. ## **Initial Accounting Seed Installation** 1. Install the **Accounting Seed managed package** and follow their configuration instructions. 2. Install the **TMS-Accounting Seed extension package**. 3. Add “**Transportation**” to the Product object **Product Family** field as a picklist choice. 4. Make the new **TMS Accounting Admin** tab visible to the system administrators. 5. From the **TMS Accounting Admin** tab: 1. Set all the **Global Default** fields you can and click **Save**. 2. Click the **Create Default Products** button if you do not have default products available or selected on the right side of the **Global Defaults** section. 3. If the Unlinked Items sections is not empty: 1. Click the **Create/Match Products for Unlinked Accessorials** button to associate products to all your unlinked accessorials. 2. Click the **Create/Match Products for Unlinked Taxes** button to associate products to all your unlinked sales taxes. 4. After clicking these two buttons the **Unlinked Items** section should be empty. 6. Provide access to appropriate internal users for the following Visualforce pages/data: 1. **TMSAccountingAdmin** 1. Add as a visible tab for appropriate internal user profiles. 2. **BillingAutoCreation** 1. Add the **Create Billing** button to the Customer Quote related list on the Load page layout. 3. **BillingTaxUpdate** 1. Add the **Calc TMS Tax** button to the Billing page layout. 4. **BillingEDISend** 1. Add the **Send via EDI** button to the Billing page layout. 5. **BillingGenerateAndSend** 1. Add the **Send Invoices** button to the Billing tab list view 6. **BillingBatchPost** 1. Add the **Batch Post** button to the Billing tab list view. 7. **BillingBatchUnpost** 1. Add the **Batch Unpost** button to the Billing tab list view. 8. **PayableAutoCreation** 1. Add the **Create Payable** button to the Carrier Quote related list on the Load page layout. 9. **PaymentProcessorSubmit** 1. Add the **Submit to Payment Processor** button to the Payable page layout. 10. **PaymentProcessorStatus** 1. Add the **Payment ProcessorStatus** button to the Payable page layout. 11. **PaymentProcessorSubmitBulk** 1. Add the **Submit to Payment Processor** button to the Payable list views 12. **PaymentProcessorStatusBulk** 1. Add the **Payment ProcessorStatus** button to the Payable list views. 13. **InvoiceAdjustment** 1. Add the **Adjust** button to the Payable page layout. 14. **PayableBatchPost** 1. Add the **Batch Post** button to the Payable tab list view. 15. **PayableBatchUnpost** 1. Add the **Batch Unpost** button to the Payable tab list view. 16. **EPaymentDetail** 1. Add the **ePayment related list** to the Load page layout. 2. Add the **New** button to this related list. 17. **BatchPostAndPay** 1. Add the **Post and Pay** button to the Payable list view. 7. Drag all fields desired onto the **Billing** page layout. 8. Drag all fields desired onto the **Payable** page layout. The **Payment Processor XXX** fields relate to the TriumphPay integration. 9. From a list view, make sure all **Product** records have the appropriate **Revenue GL Account** and **Expense GL Account** values. 10. Add the **Unapplied Cash/Credit Memos** field to the Shipper/Consignee **Transportation Profile** page layout right below the **Credit Limit** field. 11. Remove all access and visibility to the **Customer Invoice** and **Vendor Invoice** objects: 1. Remove related lists from Load page layout. 2. CRUD access should be none for these objects for all profiles. 3. Hide the Customer Invoice and Vendor Invoice tabs from all profiles. 12. See the documentation for instructions on setting up **NACHA file generation**. 13. **It is highly recommended that NO security Profiles have Delete rights on the EPayment object.** ## **TMS Commissions – Installation Instructions** 1. Before installing the application, 1. If the customer is using the Revenova Customer and Vendor Invoice objects then you will need to turn history tracking for the following objects/fields; 1. rtms__CustomerInvoice__c.rtms__Invoice_Total__c 2. rtms__CarrierInvoice__c.rtms__Accessorial_Charges__c 3. rtms__CarrierInvoice__c.rtms__Adjustments__c 4. rtms__CarrierInvoice__c.rtms__Line_Haul__c 5. rtms__CarrierInvoice__c.rtms__Fuel_Surcharge__c 2. If the customer is using Accounting Seed, then turn history tracking on for the following objects/fields; 1. AcctSeed__Billing__History.AcctSeed__Status__c 2. AcctSeed__Billing_Line__History.AcctSeed__Rate__c 3. AcctSeed__Payable__History.AcctSeed__Status__c 4. AcctSeed__Payable_Line__History.AcctSeed__Amount__c 1. Obtain the current installation URL and password from your Revenova representative. 2. Check the option to "Install for All Users" 3. Check the "I acknowledge…" checkbox 4. Click the "Install" button" ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Install%20TMS%20Commissions%201.png) 5. Once the application is installed, assign licenses TMS Commission license to user who require access to the data. ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Install%20TMS%20Commissions%202.png) 6. Setup the Incentive Payment Configuration. 1. Go to Setup > Develop > Custom Settings 2. Click on the link RTMSIncentivePaymentConfiguration ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Install%20TMS%20Commissions%203.png) 3. Click on the Manage button ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Install%20TMS%20Commissions%204.png) 4. Click on the New button ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Install%20TMS%20Commissions%205.png) 5. Enter the following information ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Install%20TMS%20Commissions%206.png) NOTE: If you are installing the app in an org that has Accounting Seed then enter ASAccounting in the Accounting Management field. 6. If you’re performing an upgrade, ensure that the Load field set ‘Commission’ has the following selected: ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Install%20TMS%20Commissions%207.png) 7. You’re all set up! ## **Upgrading from a Previous Version** You must perform each set of upgrade tasks (EXCEPT for the package installation step which can skip from any release to the latest) if you are upgrading from a release prior to the previous release. Follow the upgrade steps from the **oldest release to the newest release**, in order, for any upgrades that span multiple releases. ## Release 7.11 Upgrade Instructions ### Release 7.11 TMS Upgrade Instructions (ETC: 30 minutes) **Accounting Package Compatibility** Prior to TMS package installation, confirm there is a compatible accounting package version for the options below. - Sage API (Sage 300) - Sage Flat File - Dynamics GP Contact Professional Services with any questions. **Items in** **blue** **can be skipped if the feature is not being used. Structural changes in** **red** **should always be made.** 1. You must **install and test in a sandbox** **environment** before upgrading to the production environment. 2. You must have installed and completely configured **Release 7.10** before installing this release. 3. **SFDC/TMS Pre-Configuration** 1. For Accounting Seed customers, do not install this TMS release until you have the Accounting Seed Bridge package URL also. They must be upgraded at the same time. 2. From **Setup → Duplicate Rules**. Turn off **Matching Rules** and **Duplicate Rules** for Accounts and Contacts as they can prevent auto-creation of accounts in the application. 3. From **Setup** **→** **Data Management** **→** **Data Integration Rules** activate **Geocodes for Account Shipping Address**. 4. From **Setup → State and Country/Territory Picklists** turn on **Country/State Picklists.** Start with the **United States** as the only country unless you have more information. These picklists should be enabled unless there is a backward-compatibility issue with other packages or customizations. 5. From the **Object Manager**, make sure the customer has not added any values to the Load object’s **Sales Status** or **Load Status** picklist fields or the Stop object’s **Stop Status** picklist field. 6. For trouble deleting items in the Lightning UI, change to the **Classic UI** to perform the deletions. 7. From **Setup → Tabs**, confirm there is no custom tab for Recurring Load Schedules. 1. If no custom tab exists, move to Step 4. 2. From the **App Launcher** → **Recurring Load Schedules**, take note of the user-created views. These views need to be recreated once the packaged Recurring Load Schedule tab is added during installation. 3. Return to **Setup → Tabs**. 4. **Delete** the custom Recurring Load Schedule tab. 4. From the Object Manager, open the **EPayment** object. 1. From the *Details* tab, click the **Edit** button. 2. Under *Optional Features*, click the **Track Field History** box. 3. Click **Save**. 5. Prior to performing this upgrade, provide the *LaneIQ Network Opt-In Contract* to the customer for review and signature. This contract is necessary to perform the LaneIQ Network upgrade steps of this installation. If the customer **does not** sign the contract, skip the LaneIQ Network portion of the upgrade. 6. Obtain the **7.11 installation URL and password** from your Revenova representative. 7. Install the upgrade. 1. Select *Install for All Users*. 2. Click **Upgrade**. 3. Check the *Yes, grant access to these third-party web sites* box. 4. Click **Continue**. 5. In Setup, find *Deployment Status* and click the link to view the progress of the installation. 6. Wait for the “installation succeeded” email. > [!NOTE] > When adding new fields to page layouts during upgrade installation, set the the CRUD access as appropriate. > [!WARNING] > Warning: > > Upgrade installations do not add any objects or fields to custom permission sets. Add new fields as necessary to any custom permission sets. New fields are added automatically to Revenova packaged permission sets and do not require additional setup. > > Custom permission sets are commonly used for: > > > > Carrier Community > > Carrier Email Loop > > > > Customer Community > > Customer Email Loop 8. From **TMS Admin →** **Configuration** click on the **Reset Reference Data** button **ONCE** and wait for the email indicating completion. The process does the following: 1. Sets the ePayment Recipient Required field to "checked" for all Advance Payment Authority records. 2. Adds the LaneIQ Network credentials record. 3. Removes the old *TMS Admin →* *Configuration* **Use Platform Events** field and creates the new **Use Platform Events For** field. Installation Note: Several steps require adding or changing Load fields and page layout. It is recommended to keep the load object open in a separate tab. 9. **Organizations with a custom Recurring Load Schedules tab pre-installation** 1. From **TMS Admin** → **Recurring Load Schedules**. 2. Recreate the list views that were removed with the custom Recurring Load Schedules tab. (Step 3g). 10. **Move TMS Queued Transaction Event Processing to Platform Events** 1. Unless otherwise specified, it is strongly recommended to use Platform Events for all processes provided. 2. Confirm from **TMS Admin → Configuration** that **Use Platform Events For** is checked for: 1. Barcodes 2. Blue Yonder 3. HubTran 4. Insurance 5. LaneIQ Network 6. MacroPoint 7. Remote Documents 8. TruckerTools 9. CustomerRateLoad 10. CarrierRateLoad 3. Login to Subscriber mode and Delete the **Use Platform Events** field. This field is replaced with the new **Use Platform Events For** field. 1. While logged in via subscriber mode, click the *Manage your Custom Settings* link. 2. Click the *TMS Configuration* link. 3. Delete **Use Platform Events**. 11. While in Subscriber Mode, navigate to the Visualforce Pages list. Delete the following obsolete VFP: 1. RecurringLoadScheduleList 12. From the Object Manager, open the **EPayment** object. 1. From the *Fields & Relationships* tab, click the **Set History Tracking** button. 1. Check the **Recipient** box. 2. Confirm the **Recipient Email** box is checked. 2. Click **Save**. 13. **EPayment Without Recipient Enhancements** 1. From **TMS Admin → EPayment Administration** uncheck the **ePayment Recipient Required** field for any users that do not require recipients when saving or issuing ePayments. 2. Add new the new field as *Read-Only* to the **EPayment** page layout. 1. Recipient Email 14. **LaneIQ Network** 1. Prior to performing this upgrade, provide the *LaneIQ Network Opt-In Contract* to the customer for review and signature. This contract is necessary to perform the LaneIQ Network upgrade steps of this installation. If the customer **does not** sign the contract, skip this LaneIQ Network portion of the upgrade. 2. From the Object Manager, go to each object and add the following selections to the picklist fields: 1. **Mode** → *Default Equipment Category*, confirm ***Van****,* ***Flatbed****,* ***Reefer****,* ***Specialized****,* and ***Ocean/Intermodal*** as picklist choices. 2. **Rate Calculation Rule** → *Data Source*, in the *Values* section click *New* and add ***LaneIQ Network*** as a picklist choice. Once added, click *Reorder* and move as necessary. Add the following field dependencies for the **Equipment Category**, **Paid/Posted**, and **Search Radius**. Under Field Dependencies click the *Edit* link for each Dependent Field. Select each value and press the *Include Values* button. Click **Save**. ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Data%20Source%20-%20Equipment%20Category%20Dependencies.jpg) ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Data%20Source%20-%20Search%20Radius%20Dependencies.jpg) 3. From **TMS Admin → Configuration**: 1. Under *Global Settings*, *Use Platform Events For*, confirm **LaneIQ Network** is checked. 2. Under *Global Settings*, check **LaneIQ Network Enabled**. 4. Contact Revenova Support to provide the User ID and Password 1. 5. From **TMS Admin → Credentials** find the *LaneIQ Network* card on the Global Services tab. 1. Check the **Enabled** box. 2. Enter the Revenova provided User Id and Password 1. 3. Confirm the Service URL and Test Service URL are correct. Service URL: https://api.revenova.com:8081 Test Service: https://qa.revenova.com:8081 15. **Add Email contacts on an individual load basis with the Load Emails List** 1. Select Edit on the Load Lightning Page. 2. Navigate to the desired Load page tab. 3. Add a single Related List to the page layout. 4. From the Related List options, select **Load Emails** from the picklist. 16. **Lane Enhancements** 1. Confirm the following fields are added to the **Lane** page layout. Set these fields as **Required**. 1. Origin Type 2. Destination Type 17. **Auto-Apply Accessorial Rate Entries** 1. Add Read and/or Edit access to the **Auto-Apply** field that is added to the Rate Entry Detail LWC. 18. **Auto-Create API and Stored Rate Quotes during load creation** 1. Quotes can now be generated more efficiently during load creation. 1. Enable this feature from **TMS Admin → Configuration** and check the **Enable Save & Rate for Load Creation** box. 2. Confirm *Customer Rate Load* and *Carrier Rate Load* are checked for **Use Platform Events For**. 3. Add the field **Save & Rate Chosen** to the *Load Detail* page layout. Mark as *Read-Only*. This field helps prevent creating duplicate quotes for a load. 19. **Project44 Truckload Tracking Enhancements** 1. If using Project44 Truckload Tracking, see the article for Reference Data Key setup. 20. **Falvey Cargo Insurance Enhancements** 1. The **Cargo Value** field is required when requesting insurance from Falvey. When adding it to any page layouts it is recommended to set this field as required. Load field set TMS1 is another location to add, as well. 2. Add the following fields to the **Load Detail** page layout. Set as **Read-Only**. 1. Total Insurance Premium. Place on the *Insurance/Claims* tab. 2. Insurance Certificate PDF Link. Place on the *Insurance/Claims* tab. 3. Add the following fields to the Shipper/Consignee **Transportation Profile** page layout. Grant appropriate CRUD access. 1. Internal Cargo Insurance Option. 2. Internal Cargo Insurance Mode. 4. From **TMS Admin → Configuration**: 1. Under *Global Settings*, *Use Platform Events For*, confirm the **Insurance** box is checked. 5. From the Object Manager, add the following selection to the picklist field: 1. **Load** → *Insurance Policy Status* **field.** 2. Click **New** in the *Values* section. 3. add **Offered** as a picklist choice. 4. Click **Save**. 5. Reorder as necessary (Pending, Offered, Authorized, Voided). 6. Click **Save**. 6. The fields that display in the Insurance LWC are controlled by the Load TMS36 field set. Add fields to this field set as necessary. 7. For users that want to see the "All Risk Insurance" accessorial when creating new loads: 1. From **TMS Admin → Accessorials**, click *Edit* for **All Risk Insurance**. 2. Check the **Pre-Quote** box. 3. Click **Save**. 8. Customer Portal Changes: Make the insurance certificate link an available document in the portal. 1. From **Setup → All Sites**, click the Customer Portal *Builder* link. 2. Find the *Load Options LWC*. (By default this field is on the Load Detail page). 3. Check the "Show Cargo Insurance Certificate" box on the LWC options. *NOTE*: This LWC property can cause error messages in the builder. These error messages no longer occur once the page is Published. 4. Click **Publish**. ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Customer%20Portal%20Builder%20Update%202(1).jpg) 21. **Load Tracking Enhancements** 1. Add new tracking fields to the **Load** page layout. Set these fields as **Read-Only**. 1. Tracking Duration 2. Tracking Notes 3. Tracking Update Email List 4. Tracking Update Interval 2. Add new tracking fields to the **Carrier Transportation Profile(s)** page layout(s). 1. Tracking Provider 3. Add new tracking fields to the **Customer (Shipper/Consignee) Transportation Profile** page layout. 1. Tracking Notes 2. Tracking Update Email List 22. **Pub/Sub API Accounting Integration** 1. Add the new *Accounting Status* field to the **Account**, **Customer Invoice**, and **Vendor Invoice** page layouts. 2. See the Pub/Sub API Accounting Integration article for Setup and Configuration information. 23. **Mass Import 3rd Party User Credentials** 1. If necessary, add the new Update User Credentials LWC to the Home page layout. See the linked article for more information. 24. From the Object Manager, go to each object and remove the following choices from the picklist field: 1. **Transportation Profile** **🡪** *Tracking Provider*, if present, delete Truckstop.com as a picklist choice. 25. Make sure all relevant TMS **batch jobs** are running and/or scheduled. See the Batch Processes article for suggested run times. #### Release 7.11 Field/Field Set Modification Summary – TMS > [!NOTE] > Review fields added by the installation. Set CRUD access as needed. | **Object** | **Field/Field Set** | **Action** | **Populated** | **Notes** | | --- | --- | --- | --- | --- | | Account | Accounting Status | Add | Manual | Flag for Pub/Sub Accounting Integration | | Account | Field Set TMS6 | Add | Manual | Pub/Sub Accounting Integration | | Account | Field Set TMS7 | Add | Manual | Pub/Sub Accounting Integration | | Account | Field Set TMS8 | Add | Manual | Pub/Sub Accounting Integration | | Account | Field Set TMS9 | Add | Manual | Pub/Sub Accounting Integration | | Advance Payment Authority | ePayment Recipient Required | Add | Auto/Manual | ePayment recipient enhancements | | Contact | Field Set TMS4 | Add | Manual | Pub/Sub Accounting Integration | | Customer Invoice | Accounting Status | Add | Manual | Flag for Pub/Sub Accounting Integration | | Customer Invoice | Field Set TMS2 | Add | Manual | Pub/Sub Accounting Integration | | Customer Invoice Accessorial | Field Set TMS1 | Add | Manual | Pub/Sub Accounting Integration | | Customer Payment | Field Set TMS1 | Add | Manual | Pub/Sub Accounting Integration | | Default Accessorial | Accessorial Application | Add | Manual | Falvey Insurance Enhancements | | Default Accessorial | Mode | Add | Manual | Falvey Insurance Enhancements | | EPayment | Recipient Email | Add | Manual | ePayment recipient enhancements | | Load | Field Set TMS33 | Add | Manual | Pub/Sub Accounting Integration | | Load | Field Set TMS34 | Add | Manual | Pub/Sub Accounting Integration | | Load | Field Set TMS35 | Add | Auto | Informational fields on the Load Tracking Admin LWC | | Load | Field Set TMS36 | Add | Auto/Manual | Informational fields on the Insurance LWC | | Load | Insurance Certificate PDF Link | Add | Auto | Falvey Insurance Enhancements | | Load | Insurance Provider Fee | Add | Auto | Falvey Insurance Enhancements | | Load | Insurance Service Fee | Add | Auto | Falvey Insurance Enhancements | | Load | Insured Amount | Add | Auto | Falvey Insurance Enhancements | | Load | Save & Rate Chosen | Add | Auto | Auto-Generating Stored Rate Quotes | | Load | Total Insurance Premium | Add | Auto | Falvey Insurance Enhancements | | Load | Tracking Duration | Add | Manual | Total time to track a load. | | Load | Tracking Notes | Add | Manual | Notes sent when tracking a load. | | Load | Tracking Update Email List | Add | Manual | List of email addresses that receive MacroPoint tracking notifications. | | Load | Tracking Update Interval | Add | Manual | The update interval for a tracking session. | | Load Email | Contact | Add | Manual | Email Recipient Enhancements | | Load Email | Document Option Actions | Add | Manual | Email Recipient Enhancements | | Load Email | Email Address | Add | Manual | Email Recipient Enhancements | | Load Email | Email Recipient Type | Add | Manual | Email Recipient Enhancements | | Load Email | Load | Add | Manual | Email Recipient Enhancements | | Load Email | Name | Add | Manual | Email Recipient Enhancements | | Load Email | Target Email | Add | Manual | Email Recipient Enhancements | | Load Email | User | Add | Manual | Email Recipient Enhancements | | Mode | Default Equipment Category | Add | Manual | Used to query the Lane IQ Network database. | | Rate Calculation Rule | Data Source | Modify | Manual | Add Lane IQ Network as a data source. | | Rate Entry | Accessorial Name | Add | Manual | Supports auto-applied accessorials rate entries. | | Rate Entry | Auto-Apply | Add | Manual | Supports auto-applied accessorials rate entries. | | Transportation Profile | Auto-Apply Accessorial Rating Source | Add | Manual | Supports auto-applied accessorials rate entries. | | Transportation Profile | Field Set TMS3 | Add | Manual | Pub/Sub Accounting Integration | | Transportation Profile | Field Set TMS4 | Add | Manual | Pub/Sub Accounting Integration | | Transportation Profile | Field Set TMS5 | Add | Manual | Pub/Sub Accounting Integration | | Transportation Profile | Field Set TMS6 | Add | Manual | Pub/Sub Accounting Integration | | Transportation Profile | Field Set TMS7 | Add | Auto | Informational customer TP fields on the Load Tracking Admin LWC | | Transportation Profile | Internal Cargo Insurance Mode | Add | Manual | Falvey Insurance Enhancements | | Transportation Profile | Internal Cargo Insurance Option | Add | Manual | Falvey Insurance Enhancements | | Transportation Profile | Tracking Notes | Add | Manual | Notes sent when tracking a load. | | Transportation Profile | Tracking Provider | Add | Auto | The default tracking provider in the Load Tracking Admin modal. | | Transportation Profile | Tracking Update Email List | Add | Manual | List of email addresses that receive MacroPoint tracking notifications. | | Transportation Profile | Field Set TMS8 | Add | Auto | Informational Carrier TP fields on the Load Tracking Admin LWC | | Vendor Invoice | Accounting Status | Add | Manual | Flag for Pub/Sub Accounting Integration | | Vendor Invoice | Field Set TMS2 | Add | Manual | Pub/Sub Accounting Integration | | Vendor Invoice Accessorial | Field Set TMS1 | Add | Manual | Pub/Sub Accounting Integration | | Vendor Payment | Field Set TMS1 | Add | Manual | Pub/Sub Accounting Integration | #### Release 7.11 Accounting Seed Integration Upgrade Instructions (ETC: 15 Minutes) Accounting Seed customers must have **BOTH** the **TMS** and **Accounting Seed Bridge** packages before upgrading. Complete the TMS Upgrade installation before installing the Accounting Seed Bridge package. **Items in blue can be skipped if the feature is not being used. Structural changes in red should always be made.** 1. You must **install and test in the sandbox** before upgrading production. 2. You must have installed **Release 7.10** before installing this release. 3. Obtain the **7.11** installation URL and password from your Revenova representative. 4. Install the upgrade. Wait for the “installation succeeded” email. #### Release 7.11 Field/Field Set Modification Summary – Accounting Seed Integration | **Object** | **Field/Field Set** | **Action** | **Populated** | **Notes** | | --- | --- | --- | --- | --- | | | | | | |