--- title: "Fall '24 Equipment Type Setup" slug: "fall-24-equipment-type-setup" tags: ["Compiled from User Guide", "TMS Admin", "Admin", "Fall '24"] updated: 2025-01-15T21:32:59Z published: 2025-01-15T21:32:59Z canonical: "documents.revenova.com/fall-24-equipment-type-setup" --- > ## Documentation Index > Fetch the complete documentation index at: https://documents.revenova.com/llms.txt > Use this file to discover all available pages before exploring further. # Fall '24 Equipment Type Setup ## Overview ## Equipment Type Setup Access the list of Equipment Types from the **TMS Admin →** **Equipment Types** link. Each load can have an associated Equipment Type, which allows for cube/weight calculations and optimizations. Equipment Type is also important as an informational element on quote and tender documents, and for **Ocean FCL loads**. ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/New%20Equipement%20Type%20Modal(1).png) ### Default Equipment Type Configure a Default Equipment Type for each Mode type. When users select a Mode during Load creation, the **Equipment Type** field auto-populates. 1. Navigate to **TMS Admin → Configuration**. 2. Set **Assign Default Equipment Type** to *Checked*. 3. Navigate to **TMS Admin → Modes** and select the desired Mode. 4. Set the **Default Equipment Type** for the selected Mode. ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Default%20Equipment%20Type%20-%201.jpeg) ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Default%20Equipment%20Type%20-%202.jpeg) > [!CAUTION] > Error: > > Running the Rest Reference Data job during a TMS installation or upgrade displays this error. “Default Equipment Type: You must select an enabled Equipment Type.” > > > > Navigate to **TMS Admin** → **Modes** and review the **Default Equipment Type** for each Mode. Each Equipment Type MUST be enabled. > > ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Default Equipment Type - 1.png) ### Load Posting LWC When posting Loads with the Load Posting LWC, the truck length is based on the Equipment Type settings. Set the Dimension fields (**Length**, **Width**, **Height**) and **Dimension Units** on the Equipment Type and click **Save**.