--- title: "Carrier Markup Groups" slug: "carrier-markup-groups" tags: ["Carrier Markup Groups", "Admin", "Carrier Setup", "SMC3 RateWare - CarrierConnect", "Expanded Content"] updated: 2026-10-15T15:42:04Z published: 2026-10-15T15:42:04Z canonical: "documents.revenova.com/carrier-markup-groups" --- > ## Documentation Index > Fetch the complete documentation index at: https://documents.revenova.com/llms.txt > Use this file to discover all available pages before exploring further. # Carrier Markup Groups **Carrier Markup Groups** are groups of related Carrier Markups. **Carrier Markups** define **cost-plus** calculations that generate a Customer Quote total based on a Carrier Quote. They are used to automatically calculate the customer’s price on the self-serve [**Customer Portal**](/v1/docs/customer-self-service-portal-1), and are also indicated on the [**Freight Quote Assistant**](/v1/docs/freight-quote-assistant) page to help users properly price a load. ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Carrier Markup Group(1).png) Associate a **Carrier Markup Group** with a customer by setting this field on the [Customer Transportation Profile](/v1/docs/customer-transportation-profile#carrier-markup-groups). You can also cascade by setting a default Carrier Markup Group on the [Global Transportation Profile](/v1/docs/global-default-transportation-profile#cascading-logic-fields-and-records). View which Transportation Profiles are using the Carrier Markup Group in the related list of the Carrier Markup Group record. ## Create a Carrier Markup Group Create Carrier Markup Groups from **TMS Admin →** **Carrier Markup Groups**. ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/New Carrier Markup Group Modal.png) ## Create Carrier Markups Each Carrier Markup has standards and calculation fields that determine if there is a match and then calculate the Carrier Markup. To create Carrier Markups, in the Carrier Markup Group record, go to the Carrier Markups related list and create Carrier Markups by selecting the **New** button. Create and configure the Carrier Markup records as necessary. > [!WARNING] > **Caution**: The **Mode** field must be set to required from the Carrier Markup Lightning Record Page (LRP). Complete the following steps to set the field to required: > > 1. Navigate to a Carrier Markup record. If there are none, create a Carrier Markup first. > 2. Select **Setup** → **Edit Page**. > 3. Select the **Mode** field and set the **UI Behavior** to *Required*. > 4. Click **Save**. ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/New Carrier Markup Modal(1).png) ### Required Fields There are several **required** fields to create a Carrier Markup. Set the value for each of the following fields. | Required Field | Description | | --- | --- | | Carrier Markup Group | The Carrier Markup **Group** to which this Carrier Markup record is related. The default value is the current Carrier Markup Group record when creating this new Carrier Markup. | | Markup Basis | The rate sources this Carrier Markup uses. The values are *Carrier Quote* and *RateIQ*. If the *RateIQ* value is chosen, the markup will only apply to [Rate Entries](/v1/docs/rateiqmarkup-rate-entries) where the **Rate Method** is set to *RateIQ+Method*. *RateIQ* can be applied to all **Markup Types** *except* Accessorial. > [!NOTE] > **Note**: This field can have both **Carrier Quotes** and **RateIQ** as the chosen values. Refer to the [Markup Basis](/v1/docs/carrier-markup-groups#markup-basis) section for more details. **Default Value**: Carrier Quote | | Markup Type | The cost items to which the markup applies to the [Customer Quote](/v1/docs/customer-quote#customer-quote-items). Values include the following: - Freight - Fuel - Accessorial - Freight+Fuel+Accessorial - Freight+Fuel Refer to the [Markups and Rate Entries](/v1/docs/carrier-markup-groups#carrier-markups-and-rate-entries) section for more details. | | Mode | The [Mode](/v1/docs/mode-setup) associated with this Carrier Markup. The Carrier Markup applies if the Mode also matches the Mode on the Load record. If the optional **Carrier Service** field has a value, this field is populated with the same Mode in the [Carrier Service](/v1/docs/carrier-service-setup) record. > [!CAUTION] > **Warning**: If the **Mode** field on the Load is blank, the markup will not apply. | | Target Markup Percent | The suggested target markup percent. The percentage here is used in the calculation for the target markup. | | Minimum Markup Percent | The minimum markup **percent** for a specific Carrier Service. | | Minimum Markup Amount | The minimum markup **amount** for a specific Carrier Service. | | Transaction Fee | The suggested transaction fee to add to the Target Markup Percent. The amount used here is part of the calculation for the target markup. Refer to the [Transaction Fees](/v1/docs/carrier-markup-groups#transaction-fees) section for more details. | #### Markup Basis The **Markup Basis** field defines the rating source to use when marking up Customer Quotes using [Rate Entries](/v1/docs/rate-entry-detail). By default, the *Carrier Quote* value is chosen. If a customer has no matching Customer Rate Entries and has a matching Carrier Rate Entry, a Customer Quote is generated **based on the matching markup for that Carrier Rate Entry**. The *RateIQ* value is used for [RateIQ+Markup Rate Entries](/v1/docs/carrier-markup-groups#rateiqmarkup-rate-entries). When a RateIQ+Markup Rate Entry matches to the Load and the customer has a Carrier Markup Group that includes a RateIQ markup, then a Customer Quote is generated with the RateIQ calculation values marked up **based on the RateIQ’s value at the time the quote was generated**. > [!WARNING] > **Note**: The *Carrier Quote* and *RateIQ* values can both be chosen for the same Carrier Markup, **however**, the RateIQ markup takes precedence over the Carrier Quote markup. If the RateIQ values are **not** marked up—for example, when a Load does not match to a [RateIQ Calculation Rule](/v1/docs/rateiq-calculation-rules)—and a customer has a matching Carrier Rate Entry, then a Customer Quote is generated based on that Carrier Rate Entry. In that case where **both** values are chosen for the **Markup Basis** field, the Carrier Markup takes precedence over any other Customer Rate Entries. A Carrier Markup Group can contain markups of RateIQ markups, Carrier Quote markups, and RateIQ and Carrier Quote markups. > [!TIP] > **Tip**: To help make Carrier Quote markups specific to a [Carrier Service](/v1/docs/carrier-service-setup) or Carrier Rate Entry, create a Carrier Markup that does **not** include the *RateIQ* value for the **Markup Basis** field. #### **Transaction Fee** Transaction fees for *Freight+Fuel* and *Freight+Fuel+Accessorial* Markups are applied on a proportional basis. The percentage of the total for each charge type (freight, fuel, and/or accessorial) is multiplied by the transaction fee to calculate the amount each charge is added to each line. **Example 1** A **Transaction Fee** of $30 for a *Freight+Fuel+Accessorial* Markup is calculated as follows. - Freight: $100 - Fuel: $100 - Accessorial: $100 - Total: $300 - $100/$300 = .33 - .33 x $30 Transaction Fee = $10 - $10 is added to each line. - Freight: $110 - Fuel: $110 - Accessorial: $110 **Example 2** In cases when a *Freight+Fuel+Accessorial* Markup with a **Transaction Fee** matches, the following logic occurs. - Carrier Quotes containing a Freight charge, but no Fuel surcharge or Accessorial charge. - The entire **Transaction Fee** is added to the Freight charge on the customer quote. - Carrier Quotes containing a Freight charge and Fuel surcharge, but no Accessorial charge. - The **Transaction Fee** is added to the Customer Quote and split between the Freight and Fuel based on the percentage of the total charge represented by each individual charge. See Example 1 above for an example of the calculation to determine the percentage. - Carrier Quotes containing a Freight Charge, a Fuel surcharge, and an Accessorial charge. - The **Transaction Fee** is added to the Customer Quote and split between the Freight, Fuel, and Accessorial based on the percentage of the total charge represented by each individual charge. See Example 1 above for an example of the calculation to determine the percentage. **Example 3** In cases when a *Freight+Fuel* Markup with a **Transaction Fee** matches, the following logic occurs based on the Carrier Quote that is marked up. - Carrier Quotes containing a Freight charge but no Fuel surcharge. - The entire **Transaction Fee** is added to the Freight charge on the customer quote. - Carrier Quotes containing a Freight charge and Fuel surcharge, but no Accessorial charge. - The **Transaction Fee** is added to the Customer Quote and split between the Freight and Fuel based on the percentage of the total charge represented by each individual charge. See Example 1 above for an example of the calculation to determine the percentage. - Carrier Quotes containing a Freight Charge, a Fuel surcharge, and an Accessorial charge. - The **Transaction Fee** is added to the Customer Quote and split between the Freight and Fuel based on the percentage of the total charge represented by each individual charge. See Example 1 above for an example of the calculation to determine the percentage. ### Optional Fields The modal includes other **optional** fields when creating a Carrier Markup. Set these values for the following fields as necessary. > [!WARNING] > **Note**: By adding these optional fields, the Carrier Markup will not match to the Load or Carrier Stored Rate Entry unless those records match to these optional fields as well. Use these fields for filtering purposes. | Optional Field | Description | | --- | --- | | Effective Date | The date this Carrier Markup takes effect. | | Expiration Date | The date this Carrier Markup expires. | | Fuel Surcharge | This field appears if the **Markup Type** field is set to *Fuel*. The Carrier Markup applies if the Fuel Surcharge schedule also matches on a Rate Entry with the same schedule. If this field is blank, the markup applies to all Fuel Surcharges that do not have a specific Carrier Markup record. | | Accessorial | This field appears if the **Markup Type** field is set to *Accessorial.* The Carrier Markup applies if the accessorial also matches on the [Accessorial Rate Entry](/v1/docs/rate-entry-detail#accessorial-rate-entries) with the same accessorial. > [!CAUTION] > **Warning**: If this field is blank, the Carrier Markup does **not** apply to Customer Quotes for Loads with Accessorials. | | Carrier Service | The [Carrier Service](/v1/docs/carrier-service-setup) associated with this Carrier Markup. If this field is blank, the markup applies to all Carrier Services that do not have a specific Carrier Markup record. > [!CAUTION] > **Warning**: Do not select a Carrier Service if the **Markup Basis** field has the *RateIQ* value chosen. Doing so will prevent a Customer Quote from generating. | | Lane | The [Lane](/v1/docs/lane-detail) associated with this Carrier Markup. If this field is blank, the markup applies to all Lanes that do not have a specific Carrier Markup record. | | Minimum Carrier Quote | The minimum quote amount for a specific Carrier Service to meet in order to apply the Carrier Markup. | | Maximum Carrier Quote | The maximum quote amount for a specific Carrier Service to meet in order to apply the Carrier Markup. | | Minimum Load Weight | The minimum load weight criteria for filtering out this Carrier Markup. | | Maximum Load Weight | The maximum load weight criteria for filtering out this Carrier Markup. | | Weight Units | The unit of weight measurement for this Carrier Markup. Values include the following: - lbs - kg **Default Value**: lbs | | NMFC Class | The NMFC classes to apply the Carrier Markup. This field is only relevant for Modes that have the **LTL** box *checked*. | | Maximum Markup Amount | The maximum markup amount for a Specific Carrier Service. | ## **Markup Matching Logic** The **Carrier Markup Group** field selected on the [Customer Transportation Profile](/v1/docs/customer-transportation-profile#carrier-markup-groups) controls the set of Carrier Markups to apply to Customer Quotes. If **no** Carrier Markup matches to the Customer Quote, the **Carrier Markup Group** set on the [Global Transportation Profile](/v1/docs/global-default-transportation-profile) is used to find and apply a Carrier Markup. The following cascade logic controls how Carrier Markups are matched and applied to a Customer Quote. 1. **Matching occurs first for customer-specific *Freight*-only Markups.** 1. Any matching *Freight*-only Markup is added to the Customer Quote. 2. Any matching *Fuel*-only and/or *Accessorial*-only Markups are added to the Customer Quote. 3. If no *Freight*-only Markup matches, the next step occurs. 2. **Matching occurs for customer-specific *Freight+Fuel* Markups and may match with an *Accessorial*-only Markup.** 1. Any matching *Freight+Fuel* Markup is added to the Customer Quote. 2. Any matching *Accessorial*-only Markups are added to the Customer Quote. 3. If no *Freight+Fuel*-only and/or *Accessorial*-Only Markup matches, the next step occurs. 3. **Matching occurs for customer-specific *Freight+Fuel+Acessorial* Markups.** 1. Any matching *Freight+Fuel+Accessorial* Markup is added to the Customer Quote. 2. If no *Freight+Fuel+Accessorial* Markup matches, the next step occurs. 4. **The TMS then checks the Carrier Markup Group field set on the** [**Global Transportation Profile**](/v1/docs/global-default-transportation-profile)**.** 1. This matching occurs again for *Freight*-only Markups. 2. Any matching *Fuel*-only and/or *Accessorial*-only Markups are added to the Customer Quote. 3. If no *Freight*-only Markup matches, the next step occurs. 5. **Matching occurs for the Global Transportation Profile *Freight+Fuel* Markups and may match with an *Accessorial*-only Markup.** 1. Any matching *Freight+Fuel* Markup is added to the Customer Quote. 2. Any matching *Accessorial*-only Markups are added to the Customer Quote. 3. If no *Freight+Fuel*-only and/or *Accessorial*-Only Markup matches, the next step occurs. 6. **Matching occurs for Global Transportation Profile *Freight+Fuel+Acessorial* Markups.** 1. Any matching *Freight+Fuel+Accessorial* Markup is added to the Customer Quote. > [!NOTE] > **Note**: Matching Markups are applied when the Customer Quote is created. In some cases, [Carrier Quotes](/v1/docs/carrier-quote) returned from a quoting integration (such as [Banyan](/v1/docs/banyan#load-quoting) or [Project44](/v1/docs/project44-carrier-aggregator#ltl-quotes-request)) return with no freight charges or $0. When Carrier Quotes are generated without a $0 freight charge, the following Markups are applied to Customer Quotes: 1. Matching occurs first for customer-specific *Fuel*-only and/or *Accessorial*-only Markups are added to the Customer Quote. 2. Matching occurs for customer-specific *Freight+Fuel* Markups and may match with an *Accessorial*-only Markup. 1. Any matching *Freight+Fuel* Markup is added to the Customer Quote. 2. Any matching *Accessorial*-only Markups are added to the Customer Quote. 3. If no *Freight+Fuel* Markup matches, no Customer Quote is generated as there are no *Freight* and no *Fuel* charges. 3. Matching occurs for customer-specific *Freight+Fuel+Acessorial* Markups. 1. Any matching *Freight+Fuel+Accessorial* Markup is added to the Customer Quote. ### **Carrier Markups and Rate Entries** **Customer Rate Entries** and **Carrier Markups** can be used together on the same Customer Quote, as each cost item is calculated independently. Rate Entries have priority over Carrier Markups if both match for a cost item. If there is a customer stored Rate Entry for *Freight*, the Carrier Markup is not applied for Accessorial charges or Fuel. Since no markup is applied, only one Customer Quote is created and accepted. - The *Freight+Fuel* **Markup Type** only applies when an Accessorial Rate Entry matches to the Load. - For example, when an Auto-Apply Accessorial is added for a Stop or to the Load. - The *Freight+Fuel+Accessorial* **Markup Type** only applies when no Customer Rate Entry matches to the Load. ### RateIQ+Markup Rate Entries The [**RateIQ+Markup Rate Entry**](/v1/docs/rateiqmarkup-rate-entries) lets you automatically calculate a rate on the Load using RateIQ’s market rates and add markups to [Customer Quotes](/v1/docs/customer-quote#rateiqmarkup). To set up this feature, ensure that the following settings are configured: - The Customer Transportation Profile has a [Carrier Markup Group](/v1/docs/customer-transportation-profile#carrier-markup-groups), which contains a Carrier Markup where the **Markup Basis** is set to the *RateIQ* value. Ensure that the **Mode** field has a value. > [!NOTE] > **Note**: The [Global Default Transportation Profile](/v1/docs/global-default-transportation-profile) may also use a Carrier Markup Group that applies to all customers and cascades from the Customer Transportation Profile. > [!CAUTION] > **Warning**: RateIQ+Markup Rate Entries only applies to [Modes](/v1/docs/mode-setup) that do **not** have the **LTL** box *checked*. Ensure that both the Carrier Markup and Rate Entry records have the same **non-LTL Mode** selected. Leave the **Carrier Service** field blank as a value in this field will prevent Customer Quotes based on RateIQ from generating. ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Example RateIQ Carrier Markup(1).png) **Example RateIQ Carrier Markup** - The **RateIQ Rate Entry User** field in the [Global Settings](/v1/docs/global-settings) of **TMS Admin → Configuration** is set to a user who has API credentials to all RateIQ sources. - A [RateIQ Calculation](/v1/docs/rateiq-calculation-rules) has the **Active** box *checked* and contains configured Data Sources. - The Customer Transportation Profile has a [Rate Entry](/v1/docs/rateiqmarkup-rate-entries) where: - **Category** is set to *Customer* - **Rate Type** is set to *Freight+Fuel* - **Rate Method** is set to *RateIQ+Markup* - **Status** is set to *Accepted* ![](https://cdn.document360.io/b89abf73-101a-4754-a781-084aef8f68dd/Images/Documentation/Example RateIQ and Markup Rate Entry.png) **Example RateIQ+Markup Rate Entry** ## **Carrier Markup Application Examples** The **Minimum Customer Freight Charge** is applied when the **Minimum Markup Percent** or the **Minimum Markup Amount** is less than the **Minimum Markup Amount** plus the total Carrier Quote amount. The examples below demonstrate when a **Minimum Markup** or a **Minimum Customer Freight Charge** applies. **Example 1** - Minimum Customer Freight Charge: $350. - Minimum Markup Amount: $250. - Carrier Quote total: $35. - Carrier Quote total + Minimum Markup Amount = $285, less than the Minimum Customer Freight Charge ($350). The **Minimum Customer Freight Charge** is applied. **Example 2** - Minimum Customer Freight Charge: $350. - Minimum Markup Amount: $250. - Carrier Quote total: $221.59. - Carrier Quote total + Minimum Markup Amount = $471.59, greater than the Minimum Customer Freight Charge ($350). The **Minimum Markup Amount** is applied. When the **Markup Type** is *Freight*, Fuel and Accessorials are NOT included in the **Minimum Customer Freight Charge**. Fuel and accessorials may be added separately to the customer quote in addition to the Minimum Customer Freight Charge. > [!NOTE] > For LTL Mode loads, the line item must match all of the criteria on the Markup to apply. For example, an LTL load contains a line item with an NMFC value. If a Markup does not also contain an NMFC value, the Markup does not match and is NOT applied to the load. This functionality is specific to LTL type Modes ONLY. The SMC3-related calculation fields are only relevant for SMC3 Carrier quotes where the **Freight Charge Applied** field is populated.